Care and Cleaning
3. OVEN DOORS
CONTROL PANEL
OVEN
DOORS
(a) Control Panel
Regularly wipe with a clean, damp cloth and polish with a clean, dry cloth.
(b) Inner Door Panels & Glass
Open the door fully. The glass panel may now be washed. Stubborn stains can be removed by using a well soaped, fine steel wool soap pad.
(c)Stainless trims (BD62SS/2 - DE47X/2 -
DH93X-DH93CX-DH93K)
Regularly wipe with a clean, damp cloth and polish with a clean dry cloth.
5. HOW TO CLEAN THE LAMP LENS | GB |
TOP OVEN LAMP |
|
|
MAIN OVEN LAMP
Warning: To avoid electric shocks - please ensure that the electricity supply to the appliance is switched off and the appliance is fully cold, before cleaning lamp lens.
Open the oven door and remove the oven shelves. Using a thick cloth, grip the lamp lens, unscrew anticlockwise and remove.
Clean with a
DO NOT use scouring pads, or abrasive powder, which will scratch the glass lens
DO NOT use scouring pads, or abrasive powder, which will scratch the glass.
4. REPLACEMENT OF THE OVEN LAMP
TOP OVEN LAMP
MAIN OVEN LAMP
Warning: To avoid electric shocks - please ensure that the electricity supply to the appliance is switched off and the appliance is fully cold, before removing the lamp lens.
Open the oven door and remove the oven shelves. Using a thick cloth, grip the lamp lens, unscrew anticlockwise and remove the lens.
Carefully unscrew the bulb
Fit replacement bulb (25W 300°C SES) and refit lens.
Catalitic Cleaning (DX937CX- DX537CX-DX537CK- DX537CW)
In some models, the most exposed internal vertical sides of the oven are coated with porous enamel, which is called catalytic enamel. When heated, this enamel destroys fat particles given off by the food. This "oxidation" of the fat particles occurs when the temperature of the sides exceeds 170°C. The porous quality of the catalytic enamel increases the surface area where the exchange vital to the oxidation of the fats takes place.
If there is still grime on the catalytic surfaces after the cooking programme has ended, leave the empty oven on with the door shut, turning the temperature adjustment knob to its maximum setting. Leave the oven like this for a period of time between 60 and 90 minutes, according to how much dirt was left inside. The cleaning process for more stubborn food residues may be quickened by using hot water and a soft brush.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
33