The end of the FAST CLEAN cycle may be programmed in GB the same way as a normal cooking cycle (see Programming
the automatic cleaning end time).
Safety devices
•The 
icon on the display, when lit, indicates that the oven door was automatically locked as soon as the temperature reached a high value.
•If a malfunction occurs, the heating elements will be switched off.
•Once the oven door has been locked, it will no longer be possible to modify the duration and end of cycle settings.
Programming the automatic cleaning end time
1.Press the 
button until the 
icon and the two numerical digits on the DISPLAY begin to flash.
2.Turn the SET TIME knob towards “
” and “ ” to adjust the time.
3.Press the 
button again, until the other numerical digits on the DISPLAY begin to flash.
4.Turn the SET TIME knob towards “
” and “ ” to adjust the minute value.
5.Press the 
button again to confirm.
6.Once the set time period has elapsed, the text END appears on the DISPLAY and a buzzer sounds.
• For example: it is 9:00 and you have selected the
Economy (ECO) FAST CLEAN mode, which has a default time of 1 hour. The end of the cycle is scheduled for 12:30, meaning it will begin automatically at 11:30.
If programming has been scheduled and confirmed, the 
e 
buttons will be illuminated. The duration and the FAST CLEAN end time will appear alternately on the DISPLAY.
At the end of the automatic cleaning cycle,
you will have to wait until the temperature inside the oven has cooled down sufficiently before you can open the oven door. You will notice some white dust deposits on the bottom and the sides of your oven; remove them with a damp sponge once the oven has cooled down completely. If, on the other hand, you wish to make use of the residual heat inside the oven, you do not have to remove the dust deposits as they are completely harmless and will not affect your food in any way.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
16