Hotpoint OS897D P/HP S Installation, Positioning, Electrical connection, Built-in appliances

Page 5

Installation

! Please keep this instruction booklet in a safe place for

future reference. If the appliance is sold, given away or

moved, please make sure the booklet is also passed on to

the new owners so that they may benefit from the advice

contained within it.

! Please read this instruction manual carefully: it contains

important information concerning the safe operation,

Ventilation

To ensure adequate ventilation, the GB back panel of the cabinet must be removed. It is advisable to install

the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).

installation and maintenance of the appliance.

Positioning

! Do not let children play with the packaging material; it

should be disposed of in accordance with local separated

waste collection standards (see Precautions and tips).

! The appliance must be installed by a qualified professional

.

45

mm.

mm

 

560

 

 

min. 20 mm

FAN ASSISTED

MODE

min. 45 mm

in accordance with the instructions provided. Incorrect

installation may damage property or cause harm to people

or animals.

Built-in appliances

Use an appropriate cabinet to ensure that the appliance operates properly:

The panels adjacent to the oven must be made of heat- resistant material.

Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.

To install the oven under the counter (see diagram) or in a kitchen unit, the cabinet must have the following dimensions:

 

 

 

 

 

.

 

 

 

 

mm.23

.min

 

 

 

 

mm

 

mm.

 

 

 

547

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mm

 

 

 

 

 

45

 

 

595mm.

 

 

mm.576

558

mm.

593

 

 

 

 

 

 

 

 

 

 

595

 

5 mm.

 

 

 

 

mm.

.

 

 

 

 

 

mm

 

 

 

 

 

 

545

 

 

 

 

 

.

 

 

 

 

 

 

mm

 

 

 

 

 

24

 

 

 

 

!The appliance must not come into contact with electrical parts once it has been installed.

The indications for consumption given on the data plate

have been calculated for this type of installation.

Centring and fixing

Position the 4 tabs on the side of the oven so that they are lined up with the 4 holes on the outer frame. Adjust the tabs according to the thickness of the cabinet side panel, as shown below:

20 mm thick: take off the removable part of the tab (see diagram).;

18 mm thick: use the first groove, which has already been set in the factory (see diagram).

16 mm thick: use the second groove (see diagram).

Secure the appliance to the cabinet by opening the oven door and putting 4 screws into the 4 holes on the outer frame.

!All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.

Electrical connection

Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below).

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

5

Image 5
Contents OS 897D P /HP S OS 897D P IX /HP S Operating InstructionsGB Warnings Overall view Description of the applianceGuides for the sliding racks Rack shelf Divider shelf Control panelControl panel GB Description of the applianceDisplay Small Space Function knobPositioning InstallationElectrical connection Built-in appliancesConnecting the supply cable to the mains Fitting the power supply cableSafety measures not be observed Oven structure Setting the minute minder Setting the clockGB Start-up and use ExtraLarge SpaceAutomatic cooking functions Main Space Using the Small Space and Main Space at the same timeSmall Space Setting the end time for a cooking mode Practical cooking adviceProgramming cooking Programming the cooking durationGrill Cooking advice table for the Main Space feature Cooking advice table for the Small Space featureMaintenance and care GB Precautions and tipsInspecting the seals Cleaning the oven doorAutomatic cleaning using the Fast Clean function Safety devices Automatic cleaning end timeProgramming the automatic cleaning end time At the end of the automatic cleaning cycleHotpoint Service Afetr Sales ServiceParts and Accessories Essential Contact InformationMonths Parts and Labour Guarantee GB GuaranteeYear Parts Guarantee Extended GuaranteesPage 195102581.00