GB | A | 0 . 0 0 |
|
U |
| ||
OT | Step 4 To cancel the audible tone | ||
|
|
| press the Minute Minder button. |
Note 1: When the Minute Minder has been set, the time remaining can be checked at any time by simply pressing the Minute Minder button.
Note 2: If necessary the Minute Minder can be cancelled before the tone sounds by pressing and holding the Minute Minder button and then at the same time pressing the
Auto cooking programmes
There are two Auto Cooking programmes that can be selected using your timer:-
(a)To set the timer to switch the oven(s) On and Off Automatically
(b)To set timer to switch on immediately and OFF automatically after a set cook period.
a)To set the timer to switch the oven(s) on and off automatically
This allows you to cook at a specified time for a chosen period before the oven switches off Automatically.
Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).
Step 7 Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven function.
At the end of the Automatic Cook
2 0 Period the Auto Symbol will flash and an intermittent bleeping sound will be heard.
The audible tone will continue unless cancelled.
The ‘Auto’ symbol will continue to flash until the timer is returned to Manual operation (see below).
1 6 . 2 0
Step 8 Press the Manual button, the audible tone will be cancelled and the oven(s) will be returned to Manual.
Step 9 Turn the oven control(s) to the OFF position.
Note 1: When cooking automatically the Cook Period can be checked at any time by simply pressing the Cook Period button.
Note 2: When cooking automatically the End Time can be checked at any time by simply pressing the End Time button.
b)To set timer to switch on immediately and off automatically after a set cook period
Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).
0 . 0 0
U
A1 4 . 2 0
T
O
Step 3 Press and hold in the Cook Period button. The display will read 0.00 with the ‘cookpot’ symbol lit.
Step 4 With the Cook Period button still held in, set the required Cook Period using the “+” and
Release the buttons and the timer display will revert to the time of day with the ‘Auto’ symbol and ‘cookpot’
Step 3 Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven function.
Step 4 Press & hold in the Cook Period button, the display will read 0.00 and
the ‘cookpot’ symbol will light up. With the Cook Period button still held in set the required Cook Period using the “+” and
Example: 1hr 30 minutes (as shown). Step 5 Release all buttons.
U
A1 6 . 2 0
T
O
symbol lit.
Step 5 Press and hold in the End Time button. The display will read the earliest possible end time for the Cook Period that you have set above. The ‘Auto’ symbol and ‘cookpot’ symbol will be lit.
Step 6 With the End Time button still held in, use the “+” and
U
A1 4 . 2 0
T
O
NOTE: The Cookpot symbol disappears
U
A1 6 . 2 0
T
O
The timer display will revert to the time of day with the ‘Auto’ symbol lit & ‘cookpot’ symbol remaining lit.
At the end of the Cook Period the ‘Auto’ symbol will flash and an intermittent audible tone will be heard. The audible tone will continue until cancelled. The ‘Auto’ symbol will continue to flash until the timer is returned to Manual operation (see below).
U
A1 4 . 2 0
T
O
Release all the buttons and the timer will revert back to the time of day. The ‘Auto’ symbol will remain lit to signify that an Auto Cooking Programme has been set. The ‘cookpot’ symbol will go out.
1 6 . 2 0 | Step 6 Press the Manual button. The |
audible tone will be cancelled and | |
| the oven(s) will be returned to |
| Manual. |
Step 7 Turn the oven control(s) to the OFF position.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
10