Safety devices

Automatic cleaning with the FAST CLEAN function

With the FAST CLEAN mode, the internal temperature of the oven reaches 500°C. The pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally incinerated.

Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot. Particles may ignite inside the oven as a result of the combustion process. There is no cause for concern: this process is both normal and hazard-free.

Before initiating the FAST CLEAN mode:

•clean the oven door;

•remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents;

•remove all accessories and the sliding rack kit (where present);

•do not place tea towels or pot holders over the oven handle.

!If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to cool down.

!The programme may only be started once the oven door has been closed.

To activate the Fast Clean programme:

1. Switch the control panel on by pressing the button.

2. Press the button; the TIME display will show the default duration of 1:30 h (normal cycle), while he TEMPERATURE display will show “Piro” and “nor” alternately;

3. The desired cleaning level can be selected by pressing

the	button, then:

-pressing to switch to the intensive cycle: the duration is

2 h and the TEMPERATURE display shows the text “Piro” and “int” alternately;

- pressing to switch to the economy cycle: the duration is 1 h and the TEMPERATURE display shows the text “Piro” and “eco” alternately.

•the door locks automatically as soon as the temperature

reaches a high value; the icon lights up on the display;

•pressing the button cancels the cleaning cycle t any time;

•if a malfunction occurs, the heating elements will be switched off;

•once the oven door has been locked, you cannot change the duration and end time settings.

Programming delayed automatic cleaning

!Programming is possible only after selecting the FAST CLEAN mode.

1.Press the button and set the end time using the and buttons.

2.Once you have reached the desired end time, press the button again.

3.Press the button to activate the programmed mode. GB

4.When the selected time has elapsed, “END” appears on

the TEMPERATURE display and a buzzer sounds.

•For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN level has been selected, with the default duration of 1 hour. 12:30 is scheduled as the end time. The programme will start automatically at 11:30 a.m.

The icons and flash to indicate that programming has taken place. After programming, in the time before the Fast Clean mode starts, the TIME display indicates the duration and end of the Fast Clean mode alternately.

To cancel programming press the button.

Once the automatic cleaning cycle is over

Before you can open the oven door, you will have to wait

for the icon to switch off: this indicates the oven temperature has dropped to an acceptable level. You will notice some white dust deposits on the bottom and the sides of your oven; remove these deposits with a damp sponge once the oven has cooled down completely. Alternatively, you can make use of the already heated oven, in which case it is not necessary to remove the deposits, they are completely harmless and will not affect your food in any way.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24