Hotpoint SX 1038L P S, SX 1038L PX S manual Modes

Page 7

-switch off the oven by pressing the button for 3 seconds. 7. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking mode from the point at which it was interrupted, provided that the temperature has not dropped below a certain level. Programmed cooking modes which have not yet started will not be restored and must be reprogrammed (for example: a cooking mode has been programmed to start at 20:30. At 19:30 a blackout occurs. When the power supply is restored, the mode will have to be reprogrammed).

!There is no preheating stage for the GRILL mode.

!Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being damaged.

!Always place cookware on the rack(s) provided.

hold button

and button simultaneously for 3 seconds. GB

A buzzer sounds and the “dEoF” message disappears from the display.

Restoring the factory settings

The oven factory settings can be restored to reset all selections made by the user (clock and customised durations). To carry out a reset, switch off the oven, then press and hold the button corresponding to the first manual

cooking mode (top left) and the button simultaneously for 6 seconds. Once the restore procedure is complete, a

buzzer will sound. The first time the button is pressed, the oven will behave as if it is being switched on for the first time.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door, as well as towards the bottom of the oven door. At the beginning of the FAST CLEAN mode, the cooling fan operates at low speed.

!Once cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently.

Oven light

The light comes on when the oven door is opened or when a cooking mode starts.

The button can be used to switch on the light at any time.

Residual heat indicators

The appliance is fitted with a residual heat indicator. When the oven is off, the “residual heat” bar on the display lights up to indicate high temperatures inside the oven cavity. The individual segments of the bar switch off one by one as the temperature inside the oven falls.

Concealed handle

Some models have a concealed handle built into the oven door. Simply press lightly and the push/push opening will improve your grip when opening and closing the oven. When you have finished using it, close it again by applying light pressure.

Demo mode

The oven can operate in the DEMO mode: all heating elements are deactivated, and the controls remain operative.

To activate DEMO mode, press and release button , then buttons and simultaneously for 6 seconds, and

then press and release button . A buzzer sounds and the TEMPERATURE display shows “dEon”.

To deactivate DEMO mode, when the oven is off press and

Standby

This product complies with the requirements of the latest European Directive on the limitation of power consumption of the standby mode. If no buttons are pressed for 30 minutes and the control panel/door lock has not been activated, the appliance automatically reverts to standby mode. Standby mode is indicated by the high luminosity “Clock button” light. As soon as interaction with the machine resumes, the system’s operating mode is restored.

Modes

!In order to guarantee wonderfully soft and crunchy foodstuffs, the oven releases – in the form of water vapour - the humidity naturally withheld in the food itself. In this way, optimal cooking results can be achieved for all types of food.

!Every time the oven is switched on, it suggests the first manual cooking mode.

Manual cooking modes

!All cooking modes have a default cooking temperature which may be adjusted manually to a value between 30°C and 250°C as desired (300°C for GRILL mode). Any temperature adjustments will be stored in the appliance memory and suggested again the next time this mode is used. If the selected temperature is lower than the temperature inside the oven, the text “Hot” appears on the TEMPERATURE display. However, it will still be possible to start cooking.

MULTILEVEL mode

All heating elements and the fan are activated. Since the heat remains constant throughout the oven, the air cooks and browns food in a uniform manner. A maximum of two racks may be used at the same time.

BARBECUE mode

The top heating element and the rotisserie spit (where present) are activated. The high and direct temperature of the grill is recommended for food which requires a high surface temperature. Always cook in this mode with the oven door closed (see “Practical cooking advice”).

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

7

Image 7
Contents SX 1038L PX S SX 1038L P S Operating InstructionsGB Warnings Overall view Description of the applianceControl panel Ventilation GB InstallationPositioning Built-in appliancesElectrical Connection To the terminal marked see diagramElectrical Connection Tighten all the screws on the terminal boardControl panel lock Setting the minute minderSetting the clock GB Start-up and useModes Automatic cooking modes Programming cooking Practical cooking adviceCooking advice table Maintenance and care Precautions and tipsInspecting the seals Cleaning the oven doorSliding rack kit assembly Replacing the light bulbOnce the automatic cleaning cycle is over Automatic cleaning with the Fast Clean functionSafety devices Programming delayed automatic cleaningOn the open door TroubleshootingDo not place Or rest anythingEssential Contact Information Afetr Sales ServiceHotpoint Service Parts and AccessoriesGB Guarantee