Hotpoint RMBA 2200.L manual Installation, Positioning and connection

Installation

Íåèñïðàâíîñòè è ìåòîäû èõ óñòðàíåíèÿ

CIS

GB

Positioning and connection

Proper installation of the appliance is essential to ensure the best and most efficient performance of your appliance.

Ventilation

The compressor and condenser generate heat and, therefore, need to be ventilated properly. Rooms with less than perfect ventilation are not very suited for installation of the appliance. Therefore, it should be installed in a room with an opening (window or French window) that provides the appropriate amount of air re- circulation. It is also important that the room should not be too humid.

During installation, make sure not to cover or obstruct the grates that allow proper ventilation of the appliance. For proper ventilation of the appliance, you must leave:

- a space of at least 10 cm between the top part and any

cabinets above it;

- a space of at least 5 cm between the sides of the

appliance and any adjacent cabinets/walls.

Before placing foodstuffs in the refrigerator or freezer, clean the interior well with warm water and baking soda. After having plugged the appliance in, make sure that pilot lamp is light.

Set thermostat knob onto a medium position and can place food in the fridge after only a few hours.

When the freezer has reached the optimum temperature, you can place frozen food in the freezer.

Earthing

Before making the electrical connection, check that the voltage shown on the data plate, that you will find on the bottom left hand side of the appliance next to the crisper, corresponds to that of your mains and that the socket is earthen in conformity with all current electrical regulations. If the system is not earthen, the manufacturer declines all liability for consequent damages or losses. Do not use adapters or multiple sockets.

Check the power load

The electrical socket must support the maximum power load of the appliance shown on the data plate (on the

Âñëó÷àå íåóäîâëåòâîðèòåëüíîé ðàáîòû õîëîäèëüíèêà èëè âîçíèêíîâåíèÿ íåèñïðàâíîñòåé ïðî÷èòàéòå ýòîò ðàçäåë, ïðåæäå ÷åì âûçûâàòü òåõíèêîâ.  áîëüøèíñòâå ñëó÷àåâ Âû ìîæåòå ðåøèòü âîçíèêøèå ïðîáëåìû ñàìè.

Õîëîäèëüíèê íå ðàáîòàåò Ïðîâåðüòå, ÷òî :

-â äîìå íå îòêëþ÷åíî ýëåêòðè÷åñòâî; -ñâåòèòñÿ èíäèêàòîðíàÿ ëàìïî÷êà; -âèëêà íàäåæíî âñòàâëåíà â ðîçåòêó;

-ðîçåòêà èñïðàâíà; äëÿ ïðîâåðêè ïîäêëþ÷èòå óñòðîéñòâî, â èñïðàâíîñòè êîòîðîãî Âû óâåðåíû.

Òåìïåðàòóðà â îòäåëåíèÿõ õîëîäèëüíèêà ñëèøêîì âûñîêàÿ Ïðîâåðüòå, ÷òî:

-äâåðöû îòäåëåíèé çàêðûòû ïëîòíî, óïëîòíåíèÿ íà äâåðöàõ íå ïîâðåæäåíû; -ðó÷êà òåðìîðåãóëÿòîðà íàõîäèòñÿ â ïðàâèëüíîì ïîëîæåíèè;

-îòäåëåíèÿ íå ïåðåïîëíåíû ïðîäóêòàìè; -äâåðü îòäåëåíèÿ íå îòêðûâàëè ÷àñòî.

Ïîñòîÿííî ðàáîòàåò êîìïðåññîð

Ïðîâåðüòå, ÷òî:

-äâåðöû õîëîäèëüíèêà ïëîòíî çàêðûâàþòñÿ è îòêðûâàþòñÿ íå ñëèøêîì ÷àñòî; -òåìïåðàòóðà â ïîìåùåíèè íå ñëèøêîì âûñîêàÿ;

-ðó÷êè òåðìîðåãóëÿòîðîâ íàõîäÿòñÿ â ïðàâèëüíîì ïîëîæåíèè.

Õîëîäèëüíèê ñëèøêîì øóìèò ïðè ðàáîòå

Ïðîâåðüòå, ÷òî:

-õîëîäèëüíèê âûðîâíåí;

-õîëîäèëüíèê íå êàñàåòñÿ ïîñòîðîííèõ ïðåäìåòîâ (íàïðèìåð, îêðóæàþùåé ìåáåëè).

Õëàäàãåíò, öèðêóëèðóþùèé âíóòðè ñèñòåìû îõëàæäåíèÿ, ìîæåò íåãðîìêî áóëüêàòü, äàæå åñëè êîìïðåññîð íå ðàáîòàåò. Íå áåñïîêîéòåñü, ýòî ñîâåðøåííî íîðìàëüíî.

Away from Heat

Avoid positioning the appliance in a place where it is

directly exposed to sunlight or near an oven, cook top or

the like.

Levelling

The floor should be perfectly levelled; if not, you can

adjust the feet at the front of the appliance.

bottom left hand side of the appliance next to the crisper).

Before plugging the appliance to the mains

Set the appliance upright and wait at least 3 hours before plugging the appliance into the mains to ensure proper performance.

Ï ð î ä ó ê ò û â õ î ë î ä è ë ü í î ì îò ä å ë å í è è	Åñëè ïîñëå	ïðîâåðêè	õîëîäèëüíèê ïðîäîëæàåò
ïåðåîõëàæäàþòñÿ	ðàáîòàòü íå	äîëæíûì	îáðàçîì,	ñâÿæèòåñü ñ
Ïðîâåðüòå, ÷òî:	à â ò î ð è ç î â à í í û ì ñ å ð â è ñ í û ì			ö å í ò ð î ì ,
-ðó÷êà òåðìîðåãóëÿòîðà íàõîäèòñÿ â ïðàâèëüíîì	îáñëóæèâàþùèì ïðîäóêöèþ ìàðêè ARISTON.
ïîëîæåíèè.

12

9