Hotpoint double oven cookers Installation, Mains Connection, Siting the Cooker, Moving the Cooker

Page 5

Installation

WARNING – THIS APPLIANCE MUST BE EARTHED.

Mains Connection

Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, this is stated on the rating plate, which is situated on the outer rear panel. The model number and serial number are located on the front of the cooker, as shown on the Feature’s page.

The cooker must be connected by a competent person such as one who is a, NICEIC registered contractor to a suitable double-pole control unit with a minimum rating of 32A and a minimum contact clearance of 3mm (applicable to newer properties, older properties where a 30A double pole control unit and a minimum contact clearance of 3mm is acceptable).

The double pole control unit should be fitted adjacent to the cooker, in accordance with IEE regulations. The control unit must be within 2 metres of but not directly above the appliance and should be easily accessible in the event of an emergency.

The power supply cable should conform to B.S.6004 with a conductor size of 6mm2, minimum.

Access to the mains terminals is gained by removing the rear access cover. The mains cable must pass through the cable clamp adjacent to the terminal block. Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Ensure that the mains cable is routed away from any brackets affixed to the rear panel and is not trapped to the rear wall when pushing the cooker into position between cabinets.

Levelling

Four feet are fitted which can be adjusted up or down to set the height (900mm - 930mm) and level the cooker.

The feet can be simply screwed in or out to lower or raise the cooker.

After the correct height is achieved, lock the feet into position by tightening the locking nut using an open ended spanner.

CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully.

NOTE: Ensure oven shelves are level by using a spirit level on the rod shelves.

Siting the Cooker

The cooker is designed to fit between kitchen cabinets spaced 600mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing and cleaning. It can be used with cabinets one side or both as well as in an angled corner setting. It can also be used freestanding.

Adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer than 650mm.

Note: This appliance must NOT be fitted on a platform.

Moving the Cooker

Before moving your cooker, switch off at the cooker control unit, ensure that it is cool. Open the grill door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill elements.

Radio Interference

This appliance conforms to EN 55014 regarding suppression of radio and television interference.

Note: Take care in moving the cooker as it is heavy. Take care to ensure that any floor covering is not damaged.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Instructions This book covers EW74 EW75 Contents Introduction Mains Connection InstallationSiting the Cooker Moving the CookerAlways Safety InformationForce of the extinguisher is likely to tip the pan over NeverFeatures Hob Controls ControlsControls Oven Timer Operation Know Your Timer Electronic Clock & Automatic Oven Timer Operation Auto Cooking Programmes Electronic Clock & Automatic Oven Timer Operation Other Notes on Timer Operation Gas Main Temperature Conversion ChartMark Conventional FanSaucepans Suitable Using the Ceramic HobChoice Do Not Care of the Ceramic HobDeep fat frying SafetyRequirements for Grilling Recess Fixing the Grill Pan handleDo not place food or dishes on the floor of the oven Top Oven Conventional CookingPlatewarming in the top oven Fan Oven Cooking ChartsTop Oven Cooking Food PreTop Oven Cooking Fan Oven Cooking Main Oven Fan Cooking Using The Slow Cook Setting ‘S’ Cleaning of the Ceramic Hob Care and Cleaning of the OvenChemical oven cleaners of any kind ‘Stay Clean’ LinersOven Fittings Oven InteriorsReplacement of the Oven Light Care and CleaningDoor and Control Panel Glass Cloth Door and ControlRemove the door inner glass as follows Cleaning the DoorsDon’t panic If something goes wrongPage Hotpoint’s Free Five Year Guarantee Satisfaction Guaranteed or Your Money BackService Cover Annual Safety/Maintenance ChecksDisposal of old electrical appliances Disposal of your productRepair Service and Information Help Desk After Sales ServiceGenuine Parts and Accessories Extended Warranties

double oven cookers specifications

Hotpoint double oven cookers have gained a reputation for their exceptional design and practicality, catering to both casual cooks and culinary enthusiasts. With versatile features and modern technologies, these cookers are suited for a variety of cooking styles and family sizes.

One of the standout characteristics of Hotpoint double oven cookers is their dual cooking capability. The main oven typically offers a larger capacity, allowing you to cook multiple dishes simultaneously. Meanwhile, the second oven is ideal for smaller meals or side dishes, which can help streamline the cooking process during family gatherings or dinner parties. This feature not only saves valuable time but also enhances meal preparation by allowing users to maximize their cooking potential.

Hotpoint cookers are equipped with various cooking functions, including conventional, fan-assisted, and grill settings. The fan-assisted mode circulates hot air evenly around the oven, ensuring that dishes cook uniformly, while the grill function is perfect for browning and crisping dishes. Many models also include specific functions for baking, roasting, and defrosting, which provide versatility for all culinary needs.

Another key technology found in Hotpoint double oven cookers is the use of energy-efficient solutions. With high energy ratings, these cookers help reduce electricity consumption while still delivering powerful performance. Additionally, many models incorporate features like the self-cleaning function, which saves time and effort by using high temperatures to burn off food residue.

The design and aesthetics of Hotpoint double oven cookers also contribute to their appeal. Available in a range of stylish finishes, including stainless steel, black, and white, they can seamlessly blend into any kitchen décor. The simple yet functional control panels ensure ease of use, while the large viewing windows allow users to monitor their dishes without opening the door.

Safety features are also a priority with Hotpoint cookers. Many models include a child lock function, ensuring that little hands can’t accidentally adjust settings. The cool-touch doors help protect against burns while cooking, making them a safe choice for households with children.

In summary, Hotpoint double oven cookers deliver a blend of practicality, efficiency, and style. With their dual cooking capability, varied cooking functions, energy-efficient technologies, and thoughtful safety features, they prove to be a reliable choice for anyone looking to elevate their cooking experience. With a commitment to quality and innovation, Hotpoint continues to be a trusted name in kitchen appliances.
Top Page Image Contents