Motor Base, Food Odours and Stains, Dishwasher Safe

Cleaning, storing and caring for Oskar 400.

When you have finished processing, unplug your Oskar 400 from the power outlet and remove the Cover, Slicing/Shredding Disc or Processing Blade and the Bowl from the Motor Base.

Motor Base

Wipe with a damp cloth.

Note: Never immerse in water or other liquid. Never use a harsh detergent or abrasive.

Processing Bowl, Cover and Food Pusher

Wash in warm to hot water using a mild detergent.

Processing Blade

To remove the processed ingredients, simply remove the processing blade with processed food clinging to it, then clean the blade with a spatula before emptying the remaining food from the processing container (18).

To clean inside the base shaft, use the back of a knife or spoon handle to get right inside.

Food Odours and Stains

Strong smelling foods like garlic, fish and some vegetables such as carrots may leave an odour or stain on the processing bowl. To remove odour from the processing bowl, always rinse with cold water first. To remove slight staining, place a small portion of bi-carbonate of soda onto a damp cloth and rub the stain. Allow to stand for a few minutes before washing up.

To remove more stubborn stains or odours, immerse processing bowl in water mixed with a little kitchen bleach and allow to stand overnight.

Wash with a mild detergent the following day and dry thoroughly. Store without lid in position until next required.

Note: Never use any chemical, steel wool, harsh abrasive cleaners, thinners or chemical dust cloths for cleaning any parts of your food processor.

Important: The processing blade and slicing/shredding disc are extremely sharp! Use caution when handling and storing these parts.

(18)

Processing Blade and Slicing/Shredding Disc.

Wash in warm to hot water using a mild detergent. The internal shaft can be cleaned with a bottle brush and then dried thoroughly. If using a dishwasher, always place in top shelf away from the elements.

Sunbeam is a registered trademark. Oskar is a trademark of the Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Approved by the appropriate Electrical Regulatory Authorities. Backed by Sunbeam‘s 12 Month Replacement Guarantee and National Service Network.

Dishwasher Safe

All plastic components deteriorate through the prolonged use of a dishwasher for cleaning.

However, parts of your Oskar 400 are tolerant to dishwasher use.

These include the processing blade, reversible slicing/shredding disc, ejector disc and the food pusher.

Note: Place only on the top rack of your dishwasher.

For more information or advice on this or any other Sunbeam appliance, visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Australia 1800 025 059

New Zealand (09) 912 0747.