Features of your Gelateria (continued)
LED timer display
Set time - The preselected time for churning a mixture is displayed on the left side of the panel in red and remains constant throughout the churning process. This set time can be increased with increments of 5 minutes until a maximum of 60 minutes is reached. In the event that additional time is required above 60 minutes, the appliance will reset to 5 minutes. Set time will flash to indicate that the timer has not yet started.
Remaining time - the remaining time for churning a mixture is displayed on the right side of the panel in green and will decline
by 1 minute. When 
minutes is reached, the timer will flash and beep for 5 counts, indicating that the churning will finish in 2 minutes. When the timer has reached the set churning time, the remaining time will
display 
and the timer will beep for 18 counts.
Start/Stop - Pressing the Start button will commence the timer and rotation of the paddle. Alternatively, whilst the appliance is operating, pressing the Stop button will stop the timer as well as the paddle. Additionally, pressing the Stop button will cancel the beeping notice of the timer, if desired.
Timer Select - Allows you to select the time necessary to make a particular frozen dessert, with 5 minute increments up to 60 minutes. When this time is reached, the paddle motor will switch off automatically and beep for 18 counts.
4