Advanced Programming Options (continued)
Steam Thermoblock Temperature
The steam temperature of this espresso machine has been calibrated to deliver a powerful and dry steam for texturing milk.
The temperature of the steam can be modified in increments of 3ºC up and down should it be desired.
To do this you need to follow the instructions below:
1.Insert the power cord into a
2.Press and hold down the ‘STEAM’ button for 3 seconds.
3.While still holding down the ‘STEAM’ button briefly press the ‘POWER’ button and release.
4.Release the ‘STEAM’ button.
Note: This activates the programmability of the Steam Temperature and to signal this, the machine will output the current setting with a sequence of beeps. See chart below to determine what setting your machine is programmed to.
Beep Sequence | Setting |
3 short beeps | + 3 |
2 short beeps | + 2 |
1 short beep | + 1 |
1 short and 1 long beep | Factory Setting |
1 long beep | - 1 |
2 long beeps | - 2 |
3 long beeps | - 3 |
Note: The lights behind the 'COFFEE' and 'HOT WATER' buttons will start flashing.
| Down | Up (+) |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5.Within 30 seconds press and release one of the flashing buttons depending on the required temperature adjustment;
Up (+) a setting : Press 'HOT WATER'
Down
Note: When you have selected a new temperature setting the machine will sound a sequence of beeps to indicate the new temperature setting.
6.To save your settings press and hold down the 'STEAM' button for 3 seconds. A single long beep will sound to indicate your settings have been saved.
Note: The espresso machine will then automatically power on and begin heating up.
Note: The machine will stay in programming mode for up to 30 seconds. If you do not select a new temperature setting within 30 seconds the program will automatically return to the Factory Setting and the espresso machine will then power on and begin heating up.
27