Using the control panel
Power
Press the ‘POWER’ button once to turn the espresso machine on. The light behind the ‘POWER’ button will illuminate green and start flashing; this is to indicate that your espresso machine is on and is heating up.
Ready Mode
When the green light behind the ‘POWER’ button stops flashing and turns to a constant red light, this indicates that the espresso machine is heated and ready to use. The lights behind the 'COFFEE', 'STEAM' and 'HOT WATER' buttons will show a constant green light. The machine is now in Ready Mode as represented below.
Note: Remember that if the light behind the ‘POWER’ button is flashing it means the espresso machine is adjusting the temperature of the heating system.
To turn the espresso machine off, simply press the ‘POWER’ button, the red power light and all other lights on the control panel will turn off.
the espresso coffee operation. The coffee maker simply needs to press the ‘COFFEE’ button once to start the pour and press again to stop.
Note: Before activating the espresso coffee function ensure that the steam and hot water control dial is in the OFF position.
Important: Once the espresso coffee operation is activated, before the espresso pour starts the progressive
Note: When the coffee maker has activated the espresso coffee operation the lights behind the 'STEAM' and 'HOT WATER' buttons will go off. The lights behind the ‘POWER’ and ‘COFFEE’ buttons will remain on.
Espresso
The ‘COFFEE’ button allows the coffee maker to have complete control over the length of the espresso pour.
Once the espresso machine is switched on and heated, so the machine is in ready mode (see above), the coffee maker is able to use
Note: Once the espresso coffee operation has been activated the light behind the ‘POWER’ button will flash until the temperature of the heating system is correct. Once at the correct temperature the light will remain lit and the espresso pour will start.
7