Range Hood USE, Range Hood Care, Cleaning

Check Range Hood Operation

1.Check light operation by sliding the light switch.

2.Check operation of blower by sliding the blower switches.

3.If the range hood does not operate, check to see whether a circuit breaker has tripped or a house fuse has blown.

NOTE: To get the most efficient use from your new range hood, read the “Range Hood Use” section.

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.

The hood controls are located on the front right-hand side of the range hood.

ON	SPEED
A	BLOWER	B
	ON
C	LIGHT
C

A. Blower on

B. Blower speed

C. Light on

Range Hood Controls

Operating the Light

The LIGHT control is a 3-position switch. The first position (ON) turns both light bulbs On. The second position turns only the right-side bulb On. The third position turns both light bulbs Off.

NOTE: Do not install bulbs rated higher than 75 Watts. You may install a smaller light bulb on the right for a night light.

Operating the Blower

The BLOWER SPEED slide control adjusts the blower speed and sound level for quiet operation. The speed can be changed anytime during fan operation.

The BLOWER ON slide control turns the blower On and Off. When this control is turned On, the blower will operated at the preset speed of the slide control.

RANGE HOOD CARE

Cleaning

IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filters before operating hood.

Exterior Surfaces:

To avoid damage to the exterior surface, do not use steel wool or soap-filled scouring pads.

Always wipe dry to avoid water marks.

Cleaning Method:

■Liquid detergent soap and water, or all-purpose cleanser

■Wipe with damp soft cloth or nonabrasive sponge, then rinse with clean water and wipe dry.

Metal Grease Filter:

For vented installations:

1.Remove each filter by grasping the tab at the bottom of filter, lifting up and swinging filter out to the side.

A. Tabs

2.Wash metal filters as needed in dishwasher or hot detergent solution.

3.Reinstall the filter by making sure the tabs are toward the outside and the bottom. Insert aluminum filter into upper track.

A. Tabs

4.Push in filter.

5.Pull down on filter.

6.Repeat steps 1-5 for the other filter.

Non-Vented (recirculating) Installation Filters:

The charcoal filter is not washable. It should last up to twelve months with normal use. Replace with Kit Number 4396390.

To replace charcoal filter:

1.Snap the aluminum filter out of its frame and remove the charcoal filter.

2.Clean aluminum filter in a detergent solution of dishwater.

99044506A, W10240582A specifications

The Whirlpool W10240582A and 99044506A represent two key components in home appliance functionality, as they are essential parts for Whirlpool refrigerators. These models are designed to enhance the efficiency and performance of your appliance, ensuring that your food and beverages remain fresh and properly stored.

One of the main features of both models is their compatibility with a wide range of Whirlpool refrigerator models, making them versatile components for consumers. This adaptability allows homeowners to easily replace old or malfunctioning parts without needing to purchase a completely new unit, ultimately saving time and money.

The W10240582A is known for its high-quality construction, which emphasizes durability and longevity. This part is often an essential component in the ice-making function of the refrigerator. By providing efficient ice production, the W10240582A ensures that users have a constant supply of ice for cooling beverages, making it an ideal choice for families and social gatherings.

On the other hand, the 99044506A is designed to optimize temperature control within the refrigerator. It serves as a thermostat, ensuring that the appliance maintains the ideal cooling temperature for food preservation. This technology is crucial not only for preventing food spoilage but also for energy efficiency, as a well-regulated cooling system uses less power, contributing to lower utility bills.

Both models showcase Whirlpool's commitment to innovation and user-friendliness. They are designed for easy installation, allowing even those with minimal technical skills to replace them without professional help. The clear instructions provided with these parts further simplify the process, making it accessible for the average homeowner.

In terms of characteristics, the W10240582A and 99044506A are both backed by Whirlpool's reputation for quality. They are engineered to meet rigorous safety and performance standards, ensuring reliable operation over time. Additionally, these components often come with warranty options, reflecting the brand’s confidence in their longevity and performance.

Overall, the Whirlpool W10240582A and 99044506A serve as excellent examples of how replacement parts can significantly enhance the functionality of household appliances. With their advanced features and compatibility, they play a vital role in maintaining the efficiency and effectiveness of Whirlpool refrigerators.