Caring for the Blender, Cleaning Instructions

Caring for the Blender

Cleaning Instructions

wWARNING

Electrical Shock Hazard

Plug into a grounded outlet.

Do not remove ground.

Do not use an adapter.

Do not use an extension cord.

Do not immerse base in water or other liquid.

Failure to follow these instructions can result in death, fire, or electrical shock.

wWARNING

Cut Hazard

Always place cover on jar when blending.

Do not put hands, spoons or other utensils in jar when blending.

Failure to follow these instructions can result in broken bones or cuts.

Sanitizing

1.Wash container as instructed in “General Cleaning.”

General cleaning

Do not allow food residue to dry on any part of the blender. Wash and rinse container, cutter unit assembly and base after each use, or whenever it will not be used again within one hour, as follows:

1.Remove the container from the base, and then remove the cover. Add cleaning solution to the container. Use a washing solution of hot water (less than 115° F/46° C) and a non-sudsing detergent. Use the recommended amount of detergent.

2.Scrub and flush out the container interior, cover and filler cap to remove food residue. Empty container.

3.Fill container 1⁄4 full with fresh washing solution and place it on the base.

4.Replace the cover on the container and run the blender on high speed (except model 901) for 2 minutes.

5.Repeat step 3 using clean rinse water (95° F/35° C).

6.Wipe down the container, filler cap, and cover with a soft cloth or sponge, dampened with fresh washing solution.

7.Wipe the exterior of the base with a damp cloth or sponge. The base contains electrical components: do not immerse, use a high-pressure washer, or use a dishwasher to clean the base.

2.Fill container with sanitizing solution (See “Recommended Sanitizing Solution” below) and place on base.

3.Replace cover and filler cap and run on LOW (except model 901) speed for 2 minutes. Empty container.

4.Wipe the container exterior with a soft cloth or sponge dampened with sanitizing solution.

5.Immerse the cover and filler cap in sanitizing solution for two minutes.

6.Remove any remaining moisture from cutter assembly by replacing container on base with cover and filler cap in place. Then run blender

on HiGH (except model 901) speed for a minimum of 2 minutes.

7.To dry, place empty container on base and run on HIGH (except model 901) speed for two seconds.

8.When ready to use, rinse with clean water.

NOTE: Do not rinse container, cover or filler cap after sanitizing.

Recommended Sanitizing Solution: The sanitizing solution should consist of 1 tablespoon of household bleach per 1 gallon of clean, cool water (60° F, 16° C) mixed according to the instructions on the bleach. When using a sanitizing solution other than that recommended, the sanitizing solution concentration should be tested using commercially available test strips and should indicate a concentration between

100 and 200 parts per million of bleach to water.

909, 918, 908, 910, 919 specifications

The Hamilton Beach line of appliances, particularly models 901, 919, 910, 908, and 918, exemplifies innovation in kitchen technology, tailored to meet the diverse needs of modern home chefs. Each model boasts a unique set of features designed to enhance the cooking experience while maintaining ease of use and efficiency.

The Hamilton Beach 901 is known for its robust construction and versatility. It typically comes equipped with multiple speed settings, allowing users to adjust the blending power to achieve the desired texture, whether it’s for smoothies, soups, or sauces. Its powerful motor ensures consistent performance, even with tougher ingredients.

Model 919 stands out with its emphasis on convenience and user-friendly design. Often featuring pre-programmed settings, it allows users to select their desired function with a simple touch. This model may also include a large capacity pitcher, perfect for batch cooking or entertaining, making it a popular choice for families.

The Hamilton Beach 910 integrates modern technology with traditional cooking methods. Its built-in timer and automatic shut-off functions enhance both safety and efficiency in the kitchen. This model is often praised for its ease of cleaning, featuring removable blades and dishwasher-safe components that make post-cooking cleanup a breeze.

Models 908 and 918 introduce enhanced blending capabilities, with advanced blade systems that ensure a smoother finish for any recipe. These models frequently include pulse functions, which give users greater control over the blending process, allowing for precise texture adjustments. Additionally, the durable construction of these models ensures longevity, making them a reliable addition to any kitchen.

Across this range, Hamilton Beach emphasizes user comfort, often incorporating ergonomically designed handles and easy-pour spouts that minimize mess during serving. The stylish designs of these models also complement various kitchen aesthetics, providing both functionality and visual appeal.

In summary, the Hamilton Beach 901, 919, 910, 908, and 918 models each offer unique features to cater to different culinary needs. Their combination of powerful performance, user-friendly technology, and practical design characteristics makes them an excellent choice for anyone looking to enhance their cooking experience. Whether for everyday use or special occasions, these appliances are designed to elevate the art of cooking in the home.