Wells RWN-2, RW-16 thru RW-36, RW-26HD, RW-176HD, RW-16HD thru RW-36HD Installation, Risk Damage

Page 7

INSTALLATION (continued)

7.Reinstall drawer(s) in unit:

a.Check the roller catch inside the cabinet. The spring-loaded roller arm must be extended.

b.With the front of the drawer assembly tipped downward, engage the roller on the drawer with the cabinet drawer slide.

c.Raise the drawer to the horizontal position until the drawer- mounted slide engages the dual roller assembly on the cabinet.

d.Slide the drawer in until the catch engages. The drawer should remain tightly closed.

e.Slide the drawer out. The drawer stop should prevent the drawer from coming all of the way out.

f.Install drawer insert pans.

CAUTION:

RISK OF

DAMAGE

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.

Avoid storing flammable or combustible materials in, on or near the appliance.

CAUTION:

ELECTRICAL

SHOCK HAZARD

The ground lug of this appliance must be connected to a suitable building ground.

IMPORTANT:

Contact a licensed electrician to install and connect electrical power to the appliance.

IMPORTANT: Damage due to being connected to the wrong voltage or phase is NOT covered by warranty.

5

Image 7
Contents Important do not Discard this Manual ModelsLimited Warranty Statement Specifications Table of ContentsIntroduction Features & Operating Controls Agency Listing Information Precautions and General InformationUnpacking & Inspection InstallationInstallation Electric Shock HazardRisk Damage InstallationHeating Options OperationHOT Surface Do not OperationPrecautions Cleaning InstructionsSymptom Possible Cause Suggested Remedy Troubleshooting SuggestionsAdjustments and Lubrication Maintenance InstructionsDescription Parts & Service