A
Fig. 5.1
UPPER ELECTRIC OVEN ACCESSORIES INSTALLATION AND REMOVAL
–Hang up the wire racks “A” on the upper oven walls (fig. 5.1).
–Slide in, on the guides, the shelf etc. (fig. 5.2). Do not use the first three steps from the top.
The rack must be fitted so that the safety catch, which stops it sliding out, faces the inside of the oven.
–Position the broiler pan above the oven shelf.
–To dismantle, operate in reverse order.
Do not use these 3 steps |
|
Safety | 1 |
2 | |
catch | 3 |
| |
| Fig. 5.2 |
B
Fig. 5.3
LOWER GAS OVEN ACCESSORIES INSTALLATION AND REMOVAL
–Hang up the wire racks “B” on the lower oven walls (fig. 5.3).
–Slide in, on the guides, the shelf etc. (fig. 5.4). Do not use the first step from the top. The rack must be fitted so that the safety catch, which stops it sliding out, faces the inside of the oven.
–Position the broiler pan above the oven shelf.
–To dismantle, operate in reverse order.
Do not use this step |
Safety |
catch |
Fig. 5.4 |
REPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the appliance, it must be disconnected from the power supply.
–Let the oven cavity and the broil burner (lower oven) / upper + broil element (upper oven) cool down;
–Switch off the electrical supply;
–Remove the protective cover;
–Unscrew and replace the bulb with a new one suitable for high temperatures (300°C- 570°F) having the following specifications: 120V 60 Hz, 15W, E14
–Refit the protective cover.
NOTE: Oven bulb replacement is not covered by your guarantee.
18