Select a start time
With this programme you can preset a specific start time for the cooking or grilling of the foodstuff. If the programming is carried out correctly, the appliance starts automatically at the programmed time.
Take note: The clock must be correctly set to be able to select the function "Selecting the start time"..
1.Enter the desired cooking program:
•For microwave operation: Press the button
Operation r the appropriate number of times to set the required power level. Programme the cooking time with the control dial 0.
•For grilling: Press the button Grill 7 until the desired grill function is activated. Set the re- quired cooking time with the control dial 0.
•For convection operation: Press the button Con-
vection 9 the appropriate number of times to set the required temperature. Programme the cooking time with the control dial 0.
•For the combination process "Convection": Press the combination button Microwave –
Convention 6 the appropriate num- ber of times to set the required temperature. Programme the cooking time with the control dial 0.
•For the combination process "Grill":
Press the combination button Microwave –
Grill e the appropriate number of ti- mes to set the grilling process. Programme the cooking time with the control dial 0.
•For an automatic menu: Select the desired auto- matic menu using the control dial 0. Repeatedly press the button Weight/Kitchen Timer w
until the desired weight appears in the
display 1.
2.Press the button Clock/Timer 8 . The display 1 shows the currently set time and the hour digit flashes.
3.Turn the control dial 0 to programme in the hours.
4.Press the button Clock/Timer 8 , now the minute figure flashes.
5.Turn the control dial 0 to programme in the minutes.
6.Press the button Start/Quickstart 0 0 . The hourglass appears in the display 1.
The microwave oven automatically starts the cooking process at the programmed time.
Take note:
To query the saved start time, press the button
Clock/Timer 8 .
The saved start time will be shown in the display 1. To delete the saved start time and thus cancel the programmed procedure, press the button Clock/
Timer 8 so that the set start time appears in the display 1. Then, while the start time is to be seen in the display 1, press the button Stop/Child
safety q. The hourglass in the display 1 extinguishes. The saved procedure is deleted.
- 20 -