CHANGE/VIEW | MTSX RSS |
|
|
F5 - DELETE PERS (Delete Personality) removes the current personality. You will be prompted for a second response before the personality is deleted.
The only way to recover a deleted personality is to immediately
F7 - MDC OPTIONS (available with MDC signalling only) allows access to MDC parameters linked to this personality. Other System wide MDC parameters are located on the MDC System menu (F4/F6/F4). This function will only be active when a radio with MDC capabilities has been read and the signalling type set for MDC. Not all radios have this capability.
F8 - PHONE OPTIONS allows you to edit the conventional phone configuration for each conventional personality.
F9 - MORE OPTIONS allows access to additional parameters that can be used to customize your radio to your specific system requirements.
F10 - EXIT moves the display backward in the RSS tree, one screen or menu at a time.
FIELD DEFINITIONS:
Personality
Use the up/down arrow keys to select the desired conventional personality. The number may also be entered directly or selected via the function keys.
Refer to the radio catalog sheet for the maximum number of personalities allowed for this model.
Receive Only
Use the up/down arrow keys to enable
Direct/Talkaround
Use the up/down arrow keys to enable Talkaround operation on this personality. In talkaround (or direct) mode, the radio will transmit on the receive frequency. This is useful when a repeater is not in operation or is out of range.
Talkaround may be used in a manual or automatic mode. In the manual mode, a talkaround switch must be defined on the Radio Wide Button Switch menu (F4/F3/F3). The switch may be either on the top or side of the radio, or on the keypad menu (if applicable).
If manual talkaround operation is enabled and no switch is assigned, the radio will default to talkaround operation on this personality. The factory default for this field is Disabled.
Time-Out Timer
Use the UP/DOWN arrow keys to select the TOT (Time out Timer) for this personality.
Each personality may choose one of four different TOT values. The four values for the radio can be changed on the Radio Wide Options screen (F4/F3/F2/F9).
The TOT determines the amount of time the radio can continuously transmit before the radio must be dekeyed. When the time is about up the radio beeps and then stops transmitting.
The factory default is 60 sec.
Scan List
Use the UP/DOWN arrow keys to select the Scan List to be used for this personality.
To change or view the scan list, select the Scan List screen (F4/F3/F5). Conventional personalities may use
68P81074C50 | |
|
|
