Motorola MT2000 manual System ID, Alias, Connect Tone, Coverage Type, Remote Monitor, RM Base Time

CHANGE/VIEW MTSX RSS

System ID

This field contains the 4-digit hexadecimal number which identifies the trunked system. A system key or FTR key is required to access this field. Otherwise, the TCMS download procedure must be used. (F3/F4). This number must match the ID of the Trunking Repeater System.

Alias

Up/down arrow keys will Enable/Disable the System Alias feature. When enabled, the upper 8 bits of the System ID are ignored. Factory default is Disabled.

Connect Tone

The Connect Tone is a sub-audible tone required on the voice channel to access the trunked repeater. The function is similar to the conventional repeater access tone. This field is not applicable to SmartZone systems.

0	- 105.88 Hz	4 - 97.3 Hz.
1	- 76.60 Hz	5 - 116.13 Hz
2	- 83.72 Hz	6 - 128.57 Hz
3	- 90.00 Hz	7 - 138.46 Hz

Coverage Type

A system key or FTR key is required to access this field. Otherwise, the TCMS download procedure must be used. (F3/F4). The choices for this field are:

WAC AMSS - Wide Area Coverage Automatic Multiple Site Select.

Local AMSS - Local Automatic Multiple Site Select.

Smart Zone - New Motorola system for wide area roaming.

Disabled - Disable wide area coverage.

In an AMSS system, multiple sites are linked together to form a larger trunked system. Radios programmed for Wide Area AMSS can use the site that they are within range of, and when they move between sites, the radio can switch sites without interruption of communications that are in progress. Up to eight control channels can be used for Wide Area Systems.

If WAC AMSS is selected and WAC AMSS Failsoft is selected on the Trunking Personality screen (F4/F4/F4), the F6 function key on the personality screen will be used for entering the failsoft channels. Radios programmed for Local AMSS are only allowed to use one site. This site is entered as the Site ID below the Coverage Type field.

Remote Monitor

Use the up/down arrow keys to enable/disable Radio Trace (remote monitor) for this system.

RM Base Time

Use the up/down arrow keys to select the base time in seconds. The radio will transmit during a Radio Trace for this system (15, 30, 45, or 60 secs).

Affiliation Type (Type II/IIi) Automatic/On PTT

Use the up/down arrow keys to select the Affiliation type:

Automatic - The radio will immediately affiliate with the central controller as soon as it is turned on, and will automatically re-affiliate each time the talkgroup is changed.

On PTT - Affiliates only when the PTT is pressed. Factory default is On PTT.

6-50 68P81074C50