TUTORIAL | MTSX RSS |
|
|
3.2.11 Fill In the Scan List
Now that the Zone/Channel features are programmed, we'll now fill in the Scan List which was created earlier.
Table 3-9. Steps to Fill In the Scan List
Instruction
What to Type
How to do it/What it Means
1.Go to Radio Wide Configuration menu
2.Go to Scan List
3.Go to Member Zone
4.Enter "1" (this is the only zone applicable in this tutorial)
5.Enter channel desired to scan
6.Repeat steps 3 through 5 until all desired channels are entered.
7.If you have created more than 1 Scan List, repeat entire table for each scan list
8.Exit to MAIN MENU
F3 
F5 
TAB
Enter
ESC
From the Change/View menu, press F3 to see the Radio Wide Configuration Menu.
Press F5 to see Scan List screen. If "1" is not already displayed for Scan List number, press F3 to see previous list. If "1" is displayed, proceed ahead.
Pressing Tab advances the prompt to the next field.
Type desired channel number to be scanned.
Press Enter to select desired channel number.
We will assume that factory defaults are suitable for remaining fields.
Press Esc to exit to MAIN MENU.
68P81074C50 | |
|
|
