CHANGE/VIEW | MTSX RSS |
|
|
FIELD DEFINITIONS:
Repeater Access
Use the UP/DOWN arrow keys to select the desired conventional personality. The number may also be entered directly.
This option enables Repeater Access on this personality. Repeater Access is used to access a repeater. Typically, upon receiving Repeater Access Codeword the repeater will remain in repeat mode until the hang time expires. See help screen for extensive information.
Tone Signalling System
Use the UP/DOWN arrow keys to select the tone signalling system to be used by this personality. The factory default is 1.
Access Strapping
Use the UP/DOWN arrow keys to select the Repeater Access strapping, or Mode Slaved for this personality. The factory default is Mode Slaved.
Access Type
Use the UP/DOWN arrow keys to select the Repeater Access Type. Choices will be Manual RAC or Auto RAC. The factory default is Manual RAC.
RAB 1 Code Type
Use the UP/DOWN arrow keys to select the Repeater Access Button operation. Depending on your radio capabilities, choices will be Singletone, DTMF or MDC.
The factory default is Singletone.
RAB 1 Singletone (Hz)
For Singletone and MDC, enter the index from the Singletone List or the MDC repeater ID List.
For DTMF enter the tone value, DTMF Tone values are
Optionally, the UP/Down arrow keys could be used to scroll through indexes/values.
The factory default for Singletone will be 300Hz, for DTMF will be zero and for MDC will be 1.
RAB 2 Code Type
Use the UP/DOWN arrow keys to select the Repeater Access Button operation. Depending on your radio capabilities, choices will be Singletone, DTMF, MDC or None.
The factory default is None.
RAB 2 Singletone (Hz)
For Singletone and MDC, enter the index from the Singletone List or the MDC repeater ID List.
For DTMF enter the tone value, DTMF Tone values are
Optionally, the UP/DOWN arrow keys could be used to scroll through indexes/values.
The factory default for Singletone will be 300Hz, for DTMF will be zero and for MDC will be 1.
68P81074C50 | |
|
|
