Motorola MT2000 manual Smart PTT, Quik Key Override, Override Timer ms, Tx Power Level, Busy LED

CHANGE/VIEW	MTSX RSS
F7 - RAC OPTIONS (Repeater Access Options)
Allows access to personality specific RAC related information.
F10 - EXIT moves the display backward in the RSS tree, one screen or menu at a time.

FIELD DEFINITIONS:

Personality

Use the UP/DOWN arrow keys to select the desired conventional personality. The number may also be entered directly or selected via the function keys.

Refer to the radio catalog sheet for the maximum number of personalities allowed for this model.

Smart PTT

Use the UP/DOWN arrow keys to enable the Smart PTT function. The radio can either inhibit on carrier, or, if enabled, the radio will not transmit on a busy channel.

This feature prevents the user from listening to conversations or transmitting over conversations that they are not part of. The Monitor button is Disabled when this feature is active.

The factory default for this option is Disabled.

Quik Key Override

Use the UP/DOWN arrow keys to enable the Smart PTT (Push-to-Talk) Override feature.

If this override feature is enabled, the user can transmit on a busy channel by a quick key (double press) of the PTT switch.

The factory default for this option is Disabled.

Override Timer (ms)

This is the amount of time, in ms, the user can transmit on a busy channel by a quick key (double press) of the PTT button.

The factory default is 500 ms.

Tx Power Level

Use the UP/DOWN arrow keys to select High or Low transmit power for this personality.

The transmit power may be reduced to 1 watt for 800 and 900 MHz models and to 2 watts for VHF and UHF models.

The factory default for this feature is High.

Busy LED

Use the UP/DOWN arrow keys to enable the flashing RED LED to indicate the presence of a carrier (busy channel).

The factory default for this feature is Enabled.

Unmute/Mute Type

Use the UP/DOWN arrow keys to select the receiver muting and unmuting characteristics for this personality: Standard - The radio unmutes the audio when there is a valid PL (or DPL) signal and mutes when the PL (DPL) signal is no longer present. Use this option for Carrier Squelch operation.

6-98 68P81074C50