MTSX RSS | GETTING STARTED |
|
|
2.12.1How to Read the Codeplug
A.Connect the radio to the computer as shown in Figure
B.From the MAIN MENU press F3; the GET/SAVE/PROGRAM MENU will be displayed.
2.12.1.1 Reading the Codeplug
You may read the codeplug from the radio or from the archive disk. After reading, the codeplug will be checked for valid serial number, model number, checksums, etc.
2.12.1.2 Reading Codeplug Data from the Radio
Turn the radio on and press F2. A series of status messages will appear in the upper right corner of the screen. If a communication error occurs, a pop up window will be displayed. If no errors occur, the center of the screen will display the progress of the codeplug read. The read process will take approximately one minute. After the codeplug is read, the GET/SAVE/PROGRAM MENU will be displayed.
2.12.1.3 Reading Disk Codeplug Files
Press F3 from the GET/SAVE/PROGRAM MENU. The Disk File Names screen will be displayed. An archive path and the list of files in that path will be displayed. By default, the path will be the corresponding archive path specified on the Paths and Port screen. If you want to retrieve a file from another path, press F2, type in the path name, and then press Enter. The names of the files in the new path will be displayed.
To verify the model number and serial number of the codeplug file before reading it, select the desired file by pressing Enter, Tab, Shift, or the arrow keys until the desired filename is highlighted.
To retrieve a selected file, press F8. The selected file will be retrieved, validated, and placed in computer memory. The read process will be displayed on the screen.
68P81074C50 | |
|
|
