GETTING STARTED | MTSX RSS |
|
|
Table 2-6. Steps to Create Diskette Directory Tree
Instruction
What to Type
Explanation
1.Create diskette label
2.If no hard disk, load DOS
3.Put new diskette in A
4.Format diskette
5.Label diskette
6.Insert diskette again
7.Start at root
8.Make FIRE directory
9.Make SECURITY directory
10.Make a TOWING directory
11.Make a COURIER directory
12.Create other directories
FORMAT A:
CD \
MD FIRE
MD SECURITY MD TOWING MD COURIER
Label formatted diskette to correspond to the contents of the diskette such as “MTXS Archive Files”. Don’t apply it to the diskette yet.
See Table
Insert a new diskette into A. Close the drive door.
Format the new diskette in drive A. Discard diskette if errors occur.
Remove formatted diskette; apply label without covering the exposed magnetic area.
Insert diskette into drive A again. Close door.
Move (change directory) to the root (uppermost) directory of the diskette. Omit if already at root level.
Make a directory under Root called “FIRE”.
Make a directory under Root called “SECURITY”.
Make a directory under Root called “TOWING”.
Make a directory under Root called “COURIER”.
Make more directories for each additional category you may need.
68P81074C50 | |
|
|
