MTSX RSS

CHANGE/VIEW

 

 

PARAMETERS FOR EACH NUMBER

Personality Number

Talkgroup

This screen is used to enter Talkgroups (subfleets) that will use each personality. Once the Talkgroups/Subfleets are entered, they are assigned to a Zone/System and a Channel/Subfleet selector position on the Zone/Summary screen. (F4/F8).

If the radio is secure equipped, strapping features will be visible, and secure strapping can be set up for each field. The personality may have up to 16 talkgroups, including an Announcement Group and or a Dynamic Regrouping talkgroup.

Failsoft

Use the UP/DOWN arrow keys to Enable/Disable Failsoft for this talkgroup. When the Central Site Controller fails in a Trunked system, the system goes into Failsoft operation. If the radio is set to Failsoft by TalkGroup, then the radio will use these frequencies to transmit and receive on.

Failsoft Frequency

Enter the frequency directly in MHz. A transmit and receive frequency are required if the system is UHF or VHF.

Strapping

This field contains the transmit mode of Talkgroup or Subfleet. If set to Clear or Secure, the Talkgroup or Subfleet is forced to that particular transmit mode. When set to Select, the user is allowed to select the secure or clear transmit modes via the radio's two position concentric switch.

68P81074C50

6-71

 

 

Page 197
Image 197
Motorola MT2000 manual Parameters for Each Number, Personality Number Talkgroup, Failsoft Frequency