MTSX RSS | TUTORIAL |
|
|
3.4.6Cloning Remaining Radios
Table 3-24. Steps to Clone Radios
Instruction | What to Type | How to do it/What it Means |
|
|
|
1.Go to GET/SAVE menu.
2.Go to GET ARCHIVE FILE
3.Change the Archive path
4.Type in path name
5.Select desired file
6.Get selected file
7.Return to the GET/SAVE Menu
8.Connect target radio
9.Save source into target radio
10.Clone the Radio
11. Disconnect radio
12.Proceed to Step 1 in next table for cloning additional radios
ESC | F3 |
F3 
F2 
C:\MRSS\MTSX\ARCHIVE
TAB
F8 
F10
F5 
F8 
(Press Esc to back up to MAIN MENU.) Press F3 at the MAIN MENU to see the GET/SAVE menu.
Press F3 at the GET/SAVE menu to go to GET ARCHIVE FILE screen. A list of files is displayed which look like serial numbers that the RSS found under the archive path name.
Press F2 to highlight the archive path.
This tells the RSS to display the file names found in this directory. You will see the file named xxxxxxxx.xxx that you saved in the first tutorial.
Press Tab until the selected file is highlighted.
Press F8 to get the selected (highlighted) file.
Press F10 to return to the GET/SAVE menu.
Assemble the hardware and connect the radio you want cloned.
Press F5 from GET/SAVE to clone the current radio's codeplug with the selected source file's personality.
Press F8. The cloning process will check for compatibility of the two radios automatically. You will receive an error message if cloning cannot be performed. If for any reason the radios cannot be cloned, an error message will appear. Check all connections or refer to Appendix A.
When Step 8 is completed, you can disconnect the radio. In a matter of seconds the second radio was cloned. Disconnecting the radio should only be done at the GET/SAVE menu or the MAIN MENU, or the radio may be left in an inoperable state.
68P81074C50 | |
|
|
