Motorola MT2000 manual Clone Additional Radios 25. Cloning Additional Radios

TUTORIAL MTSX RSS

3.4.7Clone Additional Radios

Table 3-25. Cloning Additional Radios

Instruction What to Type How to do it/What it Means

1.Connect the next target radio

2.Clone the radio

3.Clone the Radio

4.Disconnect the radio

5.Clone remaining radios

F5

F8

Connect cable from RIB to the radio.

Press F5 at the GET/SAVE Menu to clone the radio. This saves (programs) the source file into the current radio.

Press F8. The cloning process will check for compatibility of the two radios automatically. You will receive an error message if cloning cannot be performed.

When Step 2 is completed, disconnect the radio.

Repeat Steps 1-3 for remaining radios. If for any reason the radios cannot be cloned, an error message will appear. Check all connections or refer to Appendix A.

3.4.8.Exit the RSS

Table 3-26. Steps to Exit the RSS

Instruction What to Type How to do it/What it Means

1.Go to MAIN MENU menu.

2.Exit to DOS

ESC

F10 F2

Press Esc to back up to MAIN MENU.

Press F10 then F2 to exit to DOS.

Congratulations! You are now a radio programmer! You now have a foundation for programming more radios. To retain a good portion of what you've learned so far, please review this material or program another radio within 48 hours.

3-28 68P81074C50