MTSX RSS | CHANGE/VIEW |
|
|
Trunk Item
Use the UP/DOWN arrow keys to select Menu functions.
Use F7 to add, and F9 to delete trunked items. Depending on your radio version and model number, you will be able to choose from all or some of the functions listed below.
CALL | Select Private Call ID (2) |
CHAN/SUB | Select/Change Channels or Subfleets. |
BLANK | No Function. No tone will sound. |
MSG | Select Message to be transmitted (2) |
MUTE | Enable/Disable the keypad beeps |
PAGE | Select Call Alert ID (2) |
PHON | Select DTMF Phone Number to be transmitted (2) |
PROG | Change Phone/Private Call/Scan lists (2) |
PSWD | Change Radio Lock Password (3) |
PWR | Enable/Disable Tx Low Power |
RPGM | Enable/Disable Reprogram Request |
SCAN | Enable/Disable Channel Scan (2) |
SITE | Change AMSS or SmartZone Site (1) |
STS | Select Status to be transmitted. [2] |
VIEW | View Phone/Private Call/Scan lists (2) |
ZONE/SYS | Select/Change zones |
NOTES
[1]For radio to function properly, this feature must also be enabled on the Trunking System screen (F4/F4/F3).
[2]For radio to function properly, this feature must also be enabled on the Trunking Personality screen (F4/F4/F4)
[3]For radio to function properly, this feature must also be enabled on the Radio Wide Display Options screen (F4/F3/F6).
*For PSWD to show on RADIO WIDE DISPLAY OPTIONS screen, RADIO LOCK must be enabled.
[4] The radio display shows 3 valid menu items per screen. When programmed menu items are not applicable for a specific zone/channel combination, the menu items will be discarded.
WARNING
THE RADIO DISPLAY MUST CONTAIN AT LEAST 1 VALID, NON- BLANK MENU ITEM. Failure to do so may result in improper behavior of the radio.
68P81074C50 | |
|
|
