MTSX RSS | TUTORIAL |
|
|
3.2.10 Program the Zone/Channel Features Next
Now that the personalities are programmed, we'll assign them to switch positions using the Zone/Channel screen.
Table 3-8. Steps to Program Zone/Channel Features
Instruction | What to Type | How to do it/What it Means |
|
|
|
1.Go to Zone/Channel Assignment screen
2.Add desired number of channels
3.Go to Page 1
4.Go to Channel Name field
5.Type in desired name
6.Go to Personality Number field. Assign the desired personality number to each Channel Number
7.Repeat steps 5 and 6 for the remainder of the channels
8.Exit to Change/View Menu
F8
F6
TAB
TAB
F10
From the Change/View menu, press F8 to see the Zone/(Channel) Assignment screen.
Pressing F6 repeatedly will add additional channels.
Press Page Down key to advance to page 1.
Pressing Tab advances the prompt to the next field.
Type desired name via the keyboard up to 11 characters. Press Enter or Tab to advance to Personality field.
NOTE: Character field may be changed to a maximum of 14 characters from Main Menu,
F4/F3/F6.
Pressing Tab advances the prompt to the next field. Type desired Personality number via keyboard or up/down arrow keys.
Press F10 to exit to Change/View Menu.
NOTE
If more than 16 personalities (channels) were created, an additional zone will be required. Zones can be added on the zone/channel screen by pressing F2. The channels in a particular zone should be grouped in some logical way, such as geographical area or work group.
68P81074C50 | |
|
|