Motorola MT2000 Radio Interface Box RIB to Computer Cable, RIB Power Supply, RKN4035A Cable

GETTING STARTED

A Computer

An IBM® Personal Computer XTTM (or compatible) may be used, but we recommend as a minimum a 386 based computer is required to improve throughput (a 80386 based computer or higher is preferred), or IBM® Personal System/2® (model 30 or higher)

Computer should have 640k of RAM, one diskette drive, and one hard drive; computer should run DOS 5.0.

B Radio Interface Box (RIB) to Computer Cable

30-80369B72 cable for IBM® Personal Computer AT® or compatible computer (9-pin end and a 15-pin end)

or 30-80369B71 cable for computers requiring a 25-pin serial port connection (25-pin end and a 15-pin end)

Smart Radio Interface Box (SRIB) to Computer Cable 30-80390B49 cable for IBM® Personal Computer AT® or compatible computer (9-pin end and a 15-pin end)

See Appendix A for connection details.

C Radio Interface Box (RIB)

RLN4008B RIB

For laptop computer and on-the-road use only;

omit item D below and use a 9V battery (not included).

or Smart Radio Interface Box (SRIB) for FLASHport Only

RLN1015A RIB (required for FLASHport upgrade)

CAUTION: Use a fresh, 9V battery. LED remains lit with a weak battery - this may cause certain errors on screen.

D	RIB Power Supply
	01-80357A57 (110 Vac) Power Supply
	or 01-80358A56 (220 Vac) Power Supply

SRIB Power Supply

01-80302E27 (120 Vac) Power Supply For FLASHport Only

Using the power supply is more reliable than using a weak battery.

E	RIB-to-Radio Cable
	RKN4035A Cable

Radio

F MT 2000, MTS 2000, MTX 838, MTX 8000 or MTX 9000 Portable Radio.

MTSX RSS

MT 2000

1	2 ABC	3DEF
4GHI	5 JKL	6MNO

7P RS 8TUV 9WX Y

0

HOME

2-2 68P81074C50