Motorola MT2000 manual CHANGE/VIEW Menu RSS Location, MAINCHANGE/VIEW CHANGE/VIEW Menu Help

MTSX RSS CHANGE/VIEW

SECTION 6. CHANGE/VIEW MENU FUNCTIONS

6.1 INTRODUCTION TO SECTION

This section describes all the functions available from the CHANGE/VIEW MENU. To guide you through these functions, the following CHANGE/VIEW-related menus and screens are shown with their specific RSS location, programming procedures from the MAIN MENU, function key descriptions, and field definitions.

NOTE

All functions (supported and unsupported) will be displayed in the menu’s working area. The unsupported functions (based on the radio’s model or options) will NOT be displayed in the F-key ID area.

6.2 CHANGE/VIEW MENU

RSS LOCATION: At the MAIN MENU, press F4 .

MOTOROLA Radio Service Software							Select Function F1 - F10
MTSX		Model:
MAIN:CHANGE/VIEW
						CHANGE/VIEW MENU
		F1	-	HELP
		F2	-
		F3	- Radio Wide Buttons, Switches, Display, Scan, Phone
		F4	- Trunking Systems, Personalities, Call Lists, Options
		F5	-
		F6	- Conventional Systems, Personalities , MDC, Options
		F7	-
		F8	-	Zone/Channel Assignment
		F9	-
		F10 -		EXIT, Return to Main Menu
	F1	F2	F3		F4	F5	F6	F7	F8	F9	F10
	HELP		RADIO		TRUNK		CONV		ZONE/CHN		EXIT
		CONFIG			DATA		DATA		ASSIGN

The CHANGE/VIEW MENU is a multi-level menu that is used to view or modify codeplug features and option configurations. All codeplug parameters are classified as either Radio Configuration, Conventional, or Trunking. The CHANGE/VIEW MENU functions permit access to each category. Unlike the SERVICE MENU functions, a codeplug must be loaded into your computer’s memory (via the GET/SAVE/PROGRAM MENU functions) before you can access the CHANGE/VIEW screens. You may change or view an archive file without a radio connected.

NOTE

If your radio model does not contain a specific feature, you will not be permitted access to the corresponding data field or screen for that feature. Refer to you radio catalog sheets or radio service manual for radio model descriptions and features.

68P81074C50 6-1