Motorola MT2000 PTT ID Sidetone, Trailing PTT ID, Radio Check, Radio Inhibit, Status Request

CHANGE/VIEW MTSX RSS

PTT ID Sidetone

Use the UP/DOWN arrow keys to enable or disable the PTT ID Sidetones. packets, the microphone and all voice transmission is automatically disabled. indicate when the data transmission is complete and you may begin talking.

During the transmission of data PTT ID Sidetones are used to

If PTT ID Sidetones are enabled, a continuous alert tone will sound as soon as you press PTT and will continue until the data packet(s) has been sent. You must wait until the tone stops before you begin talking

Trailing PTT ID

Use the UP/DOWN arrow keys to enable or disable the MDC UNIT IDENTIFICATION data packet transmission at the END of each transmission (EOT).

If the trailing PTT ID feature is enabled, each time you release the microphone PTT, the radio automatically will send the radio’s unit identification code to the dispatcher.

The PTT ID Sidetone will NOT sound for trailing PTT IDs.

Radio Check

Enabling this option allows the dispatcher to check the state of the radio (turned on or off), as long as the radio is within the range of the system. (clear mode)

Radio Inhibit

This field indicates whether or not the Radio Inhibit feature is enabled.

Enabling this field allows the radio to respond to a remote inhibit command. Upon receipt of this command the radio transmits an acknowledgement to the dispatch equipment; it then goes into a dormant state in which the receiver audio is muted, the transmit audio path is blocked, all operator controls are rendered inoperative, channel scan is stopped on the Radio Operating mode which received the command, and all LEDs are turned off. The radio can be un-inhibited via sending a radio enable command or by reading and writing the codeplug with the RSS.

Status

This field indicates whether or not the Status feature is enabled. The Status feature, when enabled, allows the user to select and transmit a specific status from a list pre-programmed into the radio. A complete activation of the Status feature therefore includes first enabling the feature and then programming the desired status list to be made available to the user. Status list programming is performed by means of the Status Alias screen (MAIN MENU-F4/F6/F9). The factory default is Disabled.

Status Request

This field indicates whether or not the Status Request feature is enabled. If Status Request is enabled, the radio responds to a remote status interrogation with the last attempted status. Disabling the feature prohibits the radio from responding to a remote status interrogation. The factory default is Disabled.

Message

This field indicates whether or not the Message feature is enabled. Message, when enabled, allows the user to select and transmit a specific message, from a list pre-programmed into the radio. A complete activation of the Message feature therefore includes first enabling the feature and then programming the desired list of messages to be made available to the user. Message list programming is performed by means of the Message Alias screen (MAIN MENU-F4/F6/F8). The factory default is Disabled.

Emergency

This field indicates whether or not the Emergency feature is Enabled.

6-106 68P81074C50