Motorola MT2000 manual Decoder 2 Call Type, Decoder Option, Codes, Freq Hz

MTSX RSS CHANGE/VIEW

Decoder 2 Call Type

Use the Up/Down arrows to scroll through the available selections.

This field dictates the Decoder 2 Call Type to be used: Individual or Group. The Factory Default is Group.

Decoder Option

Use the Up/Down arrows to scroll through the available selections. This field controls the number of decoders (1 or 2) and the decode sequences to be used on this Quik-'Call II System.

This field controls the number of decoders (1 or 2) and the decode sequences to be used on this Quik-Call II System. The Factory Default is (1) A-B.

Available selections include:

(1) A-B

(1)A-B, (2) A-C

(1)A-B, (2) C-B

(1)A-B, (2) B

(1)A-B, (2) C

(1)A-B, (2) C-D

The factory default is (1) A-B

Codes

Use the Up/Down arrows to scroll through the available selections or directly enter the desired value. Codes vary depending on the Signalling System Type. This field contains a code that represents a Quik-Call II Tone frequency. Codes vary depending on the Signalling System Type selected. The Factory Default is Code A, B, C, or D.

Note: All codes A, B, C, and D should never have the same values.

		Factory Defaults
Signalling	Code A	Code B	Code C	Code D
Type
Motorola	138	121	13	18
GE	44	7	38	51
Plectron	P1	P10	P25	P36
Federal	F1	F10	F16	F20

Freq (Hz)

Use the Up/Down arrows to scroll or directly enter the available tones. This field represents the frequency of audible tone in 0.1 Hz steps. Values from 288.5 to 3010.0 Hz in 0.1 Hz increments are allowed.

Note: All tones A, B, C, and D should never have the same values.

Factory Defaults

Signalling	Code A	Code B	Code C	Code D
Type
Motorola	288.5	600.9	1950.0	2840.0
GE	457.5	607.5	1077.5	1207.5
Plectron	643.0	950.0	1820.0	2932.0
Federal	643.0	1299.0	2084.0	2856.0

68P81074C50 6-123