MTSX RSS | TUTORIAL |
|
|
3.3.14 Fill in the Scan List
Now that the Zone/Channel features are programmed, we will fill in the scan list.
Table 3-21. Steps to Fill in the Scan List
Instruction
What to Type
How to do it/What it Means
1.Go to Radio Wide Configuration menu
2.Go to Scan List
3.Go to Member # 1 Zone
4.Select the desired zone
5.Go to Channel field
6.Enter channel number desired to scan
7.Repeat steps 4 through 6 until desired channels are entered.
8.If you have created more than 1 Scan List, repeat entire table for each scan list.
9.Exit to MAIN MENU
F3 
F5 
TAB
TAB
ESC
From the Change/View menu, press F3 to see the Radio Wide Configuration Menu.
Press F5 to see Scan List screen. If "1" is not already displayed for Scan List number, press F3 to see previous list. If "1" is displayed, proceed ahead.
Pressing Tab advances the prompt to the Zone field of Scan List Member # 1.
Press up/down arrow keys to select desired zone or enter zone number via the keyboard.
Pressing Tab advances the prompt to the Channel field.
Press up/down arrow keys to select desired channel or enter channel number via the keyboard.
Press Esc to exit to MAIN MENU.
68P81074C50 | |
|
|
