Motorola MT2000 manual Transmit Power Alignment RSS Location

SERVICE																	MTSX RSS
4.2.1.2 TRANSMIT POWER ALIGNMENT
										F2	F3
RSS LOCATION:					At the SERVICE MENU, press							.
	MOTOROLA Radio Service Software									Use UP/DOWN Arrows To Adjust Softpot.
	MTSX				Model:
	...TRANSMIT POWER
								TRANSMIT POWER
			Frequency			Current Value							New Softpot Value
						High Pwr	Low Pwr						High Pwr Low Pwr
			806.0125		30		26				30				26
			815.0125		42		42				42				42
			824.9875		50		50				50				50
			851.0125		60		60				60				60
			860.0125		70		70				70				70
			869.9875		80		80				80				80
								Transmitter..........Off
		0															127
		Min															Max
		F1		F2		F3	F4	F5		F6		F7			F8	F9	F10
	HELP								TOGGLE					PROGRAM			EXIT
										PTT					VALUE

Refer to your radio service manual for the transmitter power alignment procedure. This procedure should only be attempted by qualified service personnel.

The adaptive splatter control feature uses the transmitter power settings for reduced transmit power under strong received signal conditions to reduce adjacent-channel interference.

Transmitter power is adjusted by first keying the radio via F6, and then by pressing the up/down arrow keys to increase or decrease power respectively. SHIFT up/down will increase the adjustment speed. A relative Tx power value (NOT WATTS) will be displayed, but the actual transmitter power output must be determined from your service monitor.

PROGRAMMING PROCEDURE:

1.Press F2 at the MAIN MENU. The SERVICE MENU appears.

2.Press F2. The TRANSMITTER ALIGNMENT MENU appears.

3.Press F3. The TRANSMIT POWER screen appears.

4.Press Tab to select the desired field, or press the desired function key (F1 - F10).

5.If a field is selected, press the up/down arrow keys to select choice or value.

Function key descriptions and field definitions are on the following page.

4-6 68P81074C50