MTSX RSS

CHANGE/VIEW

 

 

FIELD DEFINITIONS:

Man Acc Live Dialing

This feature, when enabled, allows you to put in the access codes manually and dial numbers from the keypad while transmitting. When enabled, this will override the Phone Dialing selection on the Dial Options screen (F9). The factory default is Disabled.

Phone Num Display Format

This field is used when special formatting is required to display phone numbers, such as when the phone number is longer than the display.

If set to USA, the phone numbers will be assumed to be area code/number.

The default setting means no special formatting is required. The factory default is None.

Phone Number

Enter the phone number of up to 16 characters here. The ten digits are all valid, and so are the special characters P, *, and #. The P causes the radio to pause momentarily during dialing. The length of the pause is programmable and is on the DIAL OPTIONS screen. Numbers can be added or deleted with the F2 and F5 function keys. Place the cursor over the number to be deleted. New numbers will be added at the end of the list. A total of 19 numbers are allowed.

Phone Text

Enter the name that will appear on the radio display for this phone number. The maximum number of characters will be determined by the radio model. Numbers can be added or deleted with the F2 and F5 function keys. Place the cursor over the number to be deleted. New numbers will be added at the end of the list. A total of 19 numbers are allowed.

68P81074C50

6-23

 

 

Page 150
Image 150
Motorola MT2000 manual Man Acc Live Dialing, Phone Num Display Format, Phone Number, Phone Text