CHANGE/VIEW | MTSX RSS |
|
|
Type
If the Trunking System is Type I, the range of the ID changes for different size codes. The ID is a three digit hexadecimal number. If you have more than one fleet on a system, you may want to use a Universal ID, so that people calling you can use one ID. Press F8 to go to the Universal ID screen where you can enter the information required to use a universal ID.
If the Trunking System is type II or IIi, the individual ID is a four digit hexadecimal number. For Type II trunking, your radio will have a single Individual ID per system, independent of the number of talkgroups, user groups, or personalities it is affiliated with on that system.
TYPE I or TYPE II/IIi indicates the trunked signalling protocol used on this system.
Type I is the original MOTOROLA trunked signalling protocol.
Type II/IIi is an enhanced version of the original protocol that provides additional fleet management flexibility for a given system via an expanded signalling format. Each radio has a single individual ID per system, independent of the number of talkgroups, user groups, or personalities it is affiliated with on that system.
Announcement Group
Enter the Announcement Talk Group in this field. This field contains the user TalkGroup for Announcements for the current personality. The Announcement TalkGroup is a 3 digit hexadecimal number.
Strapping
This field configures the transmit mode of Announcement Group or Fleet ID. If set to Clear or Secure, the Announcement Group or Fleet ID is forced to that particular transmit mode. When set to Select, the user is allowed to select the secure transmit modes via the radio's two position concentric switch.
Individual ID
Contains the Individual ID, number that uniquely identifies your radio on a particular system.
Valid IDs will be between 1 and FFFF. The decimal equivalent of the Individual ID is used for your radio’s Private Conversation Call ID (7 + ID#), interconnect
For Type II trunking, your radio will have a single Individual ID per system, independent of the number of talkgroups, user groups, or personalities it is affiliated with on that system.
Failsoft Type
When the Central Site Controller fails in a Trunked system, the system goes into Failsoft operation. Depending on the type of system, there will be different choices for Failsoft operation:
Disabled | No failsoft used. |
Personality/Fleet | Uses the Announcement Group Failsoft Frequency for all talkgroups within the |
| personality. |
Talkgroup/Subfleet | The frequency is determined by the Subfleet selected. These are set in |
| the Subfleet screen. |
WAC AMSS | The Failsoft frequency used depends on which AMSS site the radio is using at |
| the time. The frequencies are entered via the F6 function key. |
68P81074C50 | |
|
|
