GETTING STARTED | MTSX RSS |
|
|
FIELD DEFINITIONS:
Archive Path
Enter the default directory path where archive files are to be located.
The GET/SAVE — SAVE FILE function will default to this path. Refer to your computer’s owner’s manual for a complete description of directories and path names.
FLASH Software Path
Enter the default directory path where archive files are to be located. The default path established by the MRSS installation program is C:\MRSS\MTSX\Upgrade. In order to assure a successful FLASHport Upgrade, it is strongly recommended that none of the files installed by the MRSS installation program be moved, overwritten by the user, or renamed. Prior to performing a FLASHport Upgrade, MRSS displays the list of files that exist in the path entered here. The user is then asked to select the desired FLASHport Upgrade Software Kit and press F8 to start the upgrade process. Errors such as: UNABLE TO OPEN THE SELECTED UPGRADE FILE, FILE CHECKSUM ERROR, UNABLE TO OPEN THE SELECTED UPGRADE FILE, or INCORRECT UPGRADE SOFTWARE KIT, mean that the selected file cannot be accessed, or the selected file has an invalid format (the file is not MRSS compatible), or the Software Kit No. in the file does not match the one on your FLASHKEY, respectively. In case of such errors, make sure the selected file is the one that was shipped to you with your upgrade kit.
Bootstrap Code Path & File Name
Enter the default directory path and the default file name for this file. The default path established by the RSS for this field is “C:MRSS\MTSX\UPGRADE\MTSXBOOT.ENC.
SRIB Software Path & File Name
Enter the default directory path and the default name for the SRIB Software file. The default path established by the MRSS installation program is C:\MRSS\MTSX\SRIB, and the default file name is SMARTRIB. ENC. In order to assure a successful FLASHport Upgrade, it is strongly recommended that none of the files installed by the MRSS installation program be moved, overwritten by the user, or renamed. Errors such as: UNABLE TO OPEN THE SRIB SOFTWARE FILE, or SRIB SOFTWARE CHECKSUM FILE, UNABLE TO CONTINUE, mean that the selected file cannot be accessed, or the selected file has an invalid format (the file is not MRSS compatible). In case of such errors, make sure the selected file is the one that was shipped to you with your upgrade kit.
WARNING
If you install the RSS in a drive or
TCMS Path
Enter the Default directory path from where TCMS Update files will be retrieved. The GET/SAVE — GET TCMS file function will default to this path. Refer to your computer’s owner’s manual for a complete description of asynchronous communications ports and how to configure them.
System Key
Enter the default directory path where trunking system keys are to be located. Refer to your computer’s owner’s manual for a complete description of directories and path names.
RIB
Use the up/down arrow keys to select to which asynchronous communications port (COM 1 or COM 2) your RIB (radio interface box) is connected.
If you are not sure how your computer is configured or if you have two asynchronous communications ports, first select COM 1 and use the COM TEST (F6) function to communicate with a radio. If the test fails, select COM 2 and repeat COM TEST. Be sure that all cables and power supplies are connected per the instructions in you radio service software user’s guide. Refer to your computer’s owner’s manual for a complete description of asynchronous communications ports and how to configure them.
68P81074C50 | |
|
|
