MTSX RSS | CHANGE/VIEW |
|
|
Conventional or Talkgroup type scan lists. The factory default is None.
Hot Keypad
Use the UP/DOWN arrow keys to enable Hot Keypad (DTMF while transmitting) operation for this personality. When this feature is Enabled, the keypad is live during all dispatch operations. The factory default is Disabled.
Phone Operation
Use the UP/DOWN arrow keys to select the type of phone service for this personality:
List Only - The user may only call
Unlimited - The user may call phone numbers from the list, or directly enter any number via the keypad.
None - Disable the phone for this personality.
If the Radio has Manual Access with Live Dialing, Unlimited must be selected to allow keypad access.
Signalling
Use the UP/DOWN arrow keys to enable MDC, GE STAR, or None signalling on this personality.
MDC is a Motorola proprietary, 1200 baud digital signalling protocol used for unit identification, selective signalling, and emergency features. The MDC Options function key will only be active when this field has been set to MDC. The factory default for this field is None.
GE STAR System #
Use the UP/DOWN arrows to scroll through the available selections. Directly enter the desired value. Integer values from 1 to the maximum,number of GE STAR systems are allowed. The radio will support a maximum of 7 GE STAR systems.
MDC System #
Use the UP/DOWN arrow keys to select the MDC system to be used by this personality.
To add and/or configure MDC systems, access the MDC SYSTEM screen (F4/F6/F4). The factory default is 1.
PTT ID
Use the UP/DOWN arrow keys to enable the MDC Unit Identification feature for this personality.
When this feature is enabled, each time the transmitter is keyed and/or dekeyed, the Unit ID will be broadcast. The factory default is Disabled.
Quik Call II System #
Use the UP/DOWN arrow keys to scroll through the available selections or directly enter the desired value. Integer values from 1 to the maximum number of
Revert
Use the UP/DOWN arrow keys to select the Emergency transmit channel: The choices are Selected Channel or Channel #1, #2, or #3.
Selected Channel will cause the emergency transmission to always be broadcast on the current personality. However, the emergency transmission can also be reverted to another personality. Each MDC System also contains a table of three emergency revert channels, which are configured on the MDC System menu (F4/F6/F4/F3). Channels #1, #2, and #3 refer to that table. The factory default is Selected Channel.
68P81074C50 | |
|
|
