7 | 5 | 4 | 1 | 2 | 3 | 8 | 6 |
1. PRESSURE DIAL GAUGE
The pressure dial gauge registers pres- sure in both pounds (outer scale) and metric measure (inner scale). The pointer moves around the dial indicating the pressure within the unit. Pressure can be controlled and maintained by adjusting heat setting.
2. PRESSURE REGULATOR
The pressure regulator acts as a safety device to prevent pressure in excess of 15 pounds from building in the canner. Pressure readings on the pressure canner are registered only on the pressure dial gauge.
3. VENT PIPE
The pressure regulator fits over the vent pipe and allows excess pressure to be released.
REPLACEMENT PARTS
4. AIR VENT/COVER LOCK
The air vent/cover lock automatically “vents” or exhausts air from the canner and acts as a visual indication of pressure in the canner. The small gasket must be in place for the air vent/cover lock to seal completely.
5. LOCKING BRACKET
The locking bracket on the inside of the canner body engages with the air vent/ cover lock to prevent the cover from be- ing opened when there is pressure in the unit.
6. SEALING RING
The sealing ring fits into the canner cover and forms a
7. OVERPRESSURE PLUG
The overpressure plug is located in the canner cover. It will automatically pop out and release steam in case the vent pipe becomes blocked and/or clogged and pres- sure cannot be released normally through the vent pipe.
8. CANNING-COOKING RACK
The
PRESTO Canner parts are available at most hardware stores or see parts information on page 37.
When ordering parts, please specify the seven digit model number found stamped on the side of the canner body.
3