Amplifier Connections and Interface

. .

1.GROUND LINE - This is the high current ground connection to the chassis of the car. It should be fastened to a clean ground connection in the car, capable of handling high current loads. Do not run a wire up to the car battery ground for this line. It should remain less than 3 feet in length (Imeter).

2.TRIGGER LINE - This connection is the connection point that allows the amplifier to be switched on from a remote location (usually the radio). When a positive voltage is applied to this terminal the amplifier will switch on. This connection is normally made from the power antenna lead of the radio or a dedicated trigger line. It will turn the amp on for any voltage above 10 volts. Make sure the radio’s power antenna lead is activated only when the radio is turned on.

3.BATTERY LINE - A high current, fused line should be connected at this point with battery level voltages (typical 12.5 - 14.5 V DC) available 24 hours a day.

4.FUSES - These fuses are only for catastrophic situations should the amplifier begin to self destruct. Another fuse should be located at the batterv before a run of wire is run the length of the car to the remote location of the amplifier.

5.REMOTE CONTROL INPUT - This amplifier has the capability to have its SU8WOOFER channel gain changed from a remote gain control (optional) and uses a standard RJ-1 1 telephone jack for interface. The HUSH control on the remote controls the HUSH noise reduction for the Satellite and Subwoofer channels.

6.SUBWOOFER SPEAKER OUTPUTS - These connections are used to connect loudspeakers with 1 ohm or higher speaker impedance in the 7 channel mode. If any channels are placed into bridge mode, speaker loads seen by these channels should NOJ be less than 4 ohms impedance.

Please be sure to note the proper wiring polarity ( + and - ) and take care to verify the proper wire configurations for bridge mode operation. It is imperative these speaker lines NEVER be connected or touch the chassis of the car in any way! Speaker wire gauges of up to 8 gauge in size can be accommodated by these terminals.

7.CENTER CHANNEL SPEAKER OUTPUT - These connections are used to connect the Front-Center channel loudspeaker with 2 ohm or higher speaker impedance. Please be sure to note the proper wiring polarity ( + and - ). It is imperative that these lines NOT be connected or touch the chassis of the car in any way!

8.SATELLITE SPEAKER OUTPUTS - These connections are used to connect loudspeakers with 1 ohm or higher speaker impedance. If any channels are placed into bridge mode, speaker loads seen by these channels should NOT be less than 4 ohms impedance. Please be sure to note the proper wiring polarity ( + and - ) and take care to verify the proper wire configurations for bridge mode operation. It is imperative that these lines NOT be connected or touch the chassis of the car in any way! Speaker wire gauges of up to 8 gauge in size can be accommodated by these terminals.

V7000 specifications

Blaupunkt has long been recognized as a leading name in the audio and electronic market, delivering innovative and high-performance products. Among its impressive lineup, the Blaupunkt V7000 stands out as a premium multimedia car radio that combines advanced technology with sleek design, offering users a superior in-car entertainment experience.

One of the main features of the Blaupunkt V7000 is its 7-inch capacitive touchscreen display. This vibrant display ensures users can easily navigate through menus and operate various functions with just a tap. With a resolution that enhances visibility in various lighting conditions, the screen supports an intuitive user interface that makes control seamless while driving.

The V7000 also boasts a variety of connectivity options, making it a versatile choice for modern vehicle owners. It supports Bluetooth technology, allowing for hands-free calling and audio streaming from smartphones and other compatible devices. This feature enables drivers to keep their focus on the road while enjoying their favorite music or podcasts.

In addition, the device is compatible with both Apple CarPlay and Android Auto. This integration enables users to access their smartphone's apps directly through the car's interface, providing navigation, messaging, and media features conveniently. This is particularly beneficial for users who rely on navigation apps for real-time traffic updates and directions.

Sound quality is another highlight of the Blaupunkt V7000. It features a built-in equalizer that allows users to customize sound settings according to their preferences. With multiple audio output options, including USB, auxiliary, and SD card inputs, users can enjoy their audio content in various formats.

Moreover, the V7000 is designed with modern security features, including support for reversing cameras and parking sensors, enhancing safety during driving and parking. The added functionality reduces blind spots and increases awareness of surroundings, making it a valuable upgrade for any vehicle.

In terms of aesthetics, the Blaupunkt V7000 complements any car interior. Its sleek design and illuminated controls not only add to the overall appeal but ensure ease of use at night. The combination of style, technology, and user-friendly features makes the Blaupunkt V7000 an exceptional multimedia car radio that elevates the driving experience. As the demand for integrated technology in vehicles continues to grow, the V7000 stands ready to meet and exceed user expectations, representing the very essence of Blaupunkt's commitment to innovation and quality.