English
After use
Switch off and remove the plug from the power outlet when not in use, before assembling or disassembling parts, cleaning or carrying out any maintenance of the appliance. Never pull the cord while removing it from the power outlet.
Keep children and animals away from the unit and cord set.
Inspection and repairs
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Electrical safety
This product must be earthed. Always check that the power supply
corresponds to the voltage on the rating plate
Power plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (Class l) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Never operate an appliance directly below the
Do not insert any object into the openings on the outer case.
Extension cables & Class l product
•A
•Up to 30m (100 ft) can be used without loss of power.
•If the supply cord is damaged, it must be replaced by the manufacturer or an
authorised Black & Decker Service Centre in order to avoid a hazard.
Features (Fig. A)
1Door safety lock
2Door
3Window
4Control panel
5Timer control
6Power control
7Roller support
8Glass tray
Unpacking
•Remove all packaging from the appliance.
•Inspect the oven after unpacking for any damage such as a misaligned or damaged door, dents or holes in the door window and screen, and any dents in the cavity. If any of these are seen, DO NOT use the oven.
•Clean the appliance before first use.
Assembly (Fig. B)
Warning! Before assembly, make sure that the appliance is switched off and unplugged.
•Place the appliance on a flat, even surface.
•Open the door (2) & place the roller support (7) into the hole in the cavity base.
•Align the glass tray (8) on top of the roller support.
•Connect the appliance to a suitable electrical supply.