Black & Decker DE43 How to Use, Product may vary slightly from what is illustrated, Brewing, DE8

Page 3

DE8Pub1000000664RV1 4/22/05 11:13 AM Page 4

Product may vary slightly from what is illustrated.

How to Use

This appliance is intended for household use only.

Getting Started

1. Remove all stickers, packing material, and literature.

Important: For warranty verification, please do not remove line cord sticker.

2.Wash all parts as instructed in the Care and Cleaning section.

3.Pour cold water up to 11-cup level mark in the water reservoir.

Brew it through as instructed in "BREWING", but do not add coffee grounds to the paper filter. When done, turn off the coffeemaker and discard the water from the carafe.

BREWING

1.Lift the one-piece cover. Use water markings on carafe to fill water reservoir with cold water.

2.Place a paper filter or the permanent gold-tone filter into the brew basket. Add ground coffee, (we recommend one heaping tablespoon for every 2 cups). Close the cover.

3.Place carafe on the "Keep Hot" plate and plug in the unit.

4.Press "ON/OFF" and the indicator light comes on, or, for delayed brewing (Clock Models), see "SETTING THE CLOCK/TIMER & AUTO-BREW". You don’t have to set the clock if you want to brew coffee right away.

5.Replace the carafe on the "Keep Hot" plate when not serving to keep coffee hot.

6.Press "ON/OFF" to turn off unit.

In models DE40 and DE43, coffeemaker will keep coffee warm for 2 hours before it automatically shuts off.

Sneak-A-Cup® Interrupt Feature

You can pour a cup of coffee while coffee is brewing without leaking from the brew basket. When finished pouring coffee, place the carafe under brew basket. The brewing process continues.

Important: To avoid possible overflow after removing the carafe, be sure to replace the carafe under the brew basket within one minute or less.

1. One-piece cover (Part # DE43-01)

2.Water spreader

3.Water reservoir

4.Water windows (on both sides) with cup level markings

5.Cord storage (inside of unit)

6.Control panel (see models illus.)

7.“Keep Hot” plate

8. 12-cup/60 oz. (1800 ml) carafe (Part # DE43-03 (W))

(Part # DE43-05 (B))

9. Hinged carafe lid (Part # DE43-04 (W) (Part # DE43-06 (B))

†10. Removable brew basket (Part # DE43-02)

11. Guide

†12. Permanent gold-tone filter (certain models) (Part #175543-00)

† Consumer replaceable

SETTING THE CLOCK/TIMER & AUTO-BREW (For Clock Models)

Plug in unit, clock flashes 12:00 a.m. until correct time is set. The coffeemaker works without setting the clock.

1. To set current time of day: Press the HOUR button, little dot in the top left corner of the

display indicates "p.m." time. Press the MIN button. Clock momentarily flashes the time

just set. Once set, clock continues to keep time unless coffeemaker is unplugged or a

power failure occurs. To reset, press SET button and reset current time. Clock can only

be reset when in the flashing mode.

2. To set the Auto Brew time: Press the PROG button and the light near the AUTO button

starts flashing indicating it is being programmed. Press the HOUR, then MIN buttons to set

the time you’d like coffee to automatically begin brewing (for example 7:15 a.m.). Watch

for the "p.m." indicator dot at the top left of the digital display. When finished, press the

AUTO button. The AUTO light will stop flashing and will stay on to show the timer is

activated.

CONTROL PANELS

DE8

 

DE40, DE43

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

Prepare the coffeemaker for brewing as instructed in "BREWING" but don’t turn

 

on the unit.

4.

To check your pre-set auto time, press PROG and it will display. When the clock returns

 

to the current time of day, press AUTO to reactivate the timer. To automatically brew

 

coffee again at the same pre-set auto-on time, prepare coffeemaker for brewing again

 

and press the AUTO button.

Note: The Auto Brew function can be canceled at any time by pressing the AUTO button a second time. The AUTO light goes out.

3

4

Image 3
Contents USA/Canada Mexico Models/Modelos/Modèles DE8, DE40, DE43Important Safeguards Polarized Plug 120V Models OnlyTAMPER-RESISTANT Screw Electrical Cord DE8 How to UseProduct may vary slightly from what is illustrated BrewingGuarde Estas Instrucciones Care and CleaningCleaning Instrucciones Importantes DE SeguridadNo. de pieza175543-00 † Reemplazable por el consumidor Cable ÉlectricoCuidado y limpieza Como usarConserver CES Mesures Importantes Mises EN GardeLe produit peut différer légèrement de celui illustré Fiche Polarisée Modèles de 120 V seulementVIS Indesserrable CordonUtilisation Entretien et nettoyagePréparatifs ¿NECESITA AYUDA? Need HELP?Besoin D’AIDE? Costa Rica Avertissement AfinImportado por

DE8, DE40, DE43 specifications

The Black & Decker DE43, DE40, and DE8 models are part of a renowned line of power tools that cater to both professional and DIY enthusiasts. Each model is designed with specific features and technologies that enhance performance and user experience.

The Black & Decker DE43 is celebrated for its robust design and exceptional power handling capabilities. It features a high-torque motor that delivers consistent performance, making it ideal for heavy-duty applications. The DE43 is equipped with an ergonomic handle that reduces user fatigue, allowing for extended use without discomfort. Its anti-slip grip ensures safety during operation, even in challenging conditions. Additionally, the model comes with a variable speed control feature that provides flexibility for different tasks, from drilling to driving screws, ensuring precision without compromising on speed.

The DE40 model stands out for its versatility and advanced technology. This model incorporates a smart battery management system that prolongs battery life and ensures optimal performance. The DE40’s lightweight design makes it easy to handle, while its compact size allows for access to tight spaces, making it ideal for precision work. The tool boasts a quick-change chuck that facilitates fast bit changes, saving time on the job. Furthermore, the DE40 is equipped with an LED work light, enhancing visibility in dimly lit environments, ensuring that users can work comfortably and safely.

Meanwhile, the Black & Decker DE8 model is designed for those who prioritize portability without sacrificing power. This model is lightweight and compact, perfect for users who need a reliable tool that can be easily transported to various locations. The DE8 utilizes lithium-ion battery technology, which provides a longer run-time and shorter charging time compared to traditional batteries. Users can enjoy the convenience of a cordless tool that doesn’t compromise on power or functionality. Moreover, the DE8 features multiple speed settings, allowing users to adjust the performance based on the task at hand.

In summary, the Black & Decker DE43, DE40, and DE8 encompass a range of features and technologies suited for different needs. Whether it's the heavy-duty capabilities of the DE43, the versatility of the DE40, or the portability of the DE8, each model reflects Black & Decker’s commitment to quality, innovation, and user satisfaction. These tools are designed to empower users, offering the reliability and efficiency required to tackle any project with confidence.