Andrew OMACS3000 manual Operator’s Computer Setup, Java Plug In Installation, LMKVS-CPU IP Setup

Page 11

11-APR-06

Rev E

OMACS3000

System Setup

Operator’s Computer Setup

The ACS3000 is controlled from an operator's computer through an Ethernet connection to the LMKVS-CPU. The LMKVS-CPU may be connected to the operator's computer via a LAN (Local Area Network) or via a direct connection using an Ethernet crossover cable. A browser such as Internet Explorer or Netscape is necessary to activate the Java applet that manages the ACS3000 LMKVS-CPU. In order to use a browser to connect to the LMKVS-CPU, the Java Plug-in application must be installed on the operator's computer.

IMPORTANT NOTE: Minimum system requirement for use of Revision E of ACS3000 software and Java Plug-in version 1.4.2_05 is Windows 98. Earlier versions of Windows are not supported.

Java Plug In Installation

The Java Plug-in application is available from Andrew and is installed from a CD delivered with the LMKVS- CPU. After the file is loaded to the operator's computer, execute the program to install the current version. The current version of the Java Plug-in program is j2re-1_4_2_05-windows-i586-p.exe. Execute this program and follow the setup options. Once the program is installed, the operator must replace the java.policy file that was created by the installation with the java.policy file available on the CD delivered by Andrew. The new java.policy file must be copied over the java.policy file in the directory C:\Program Files\ Java\ j2re1.4.2_05\lib\security.

Operator’s Computer IP Address

The LMKVS-CPU and operator's computer IP addresses also need to be set up. If a LAN is used, the operator needs to set up the Internet connection options on his browser. The operator should contact his IT manager in order to verify that the LAN to be used is compatible with the IP address assigned to the ACS300 system. If the LAN is not compatible with the default IP assigned to the ACS3000, the operator must create a single system network to directly connect the operator’s computer with the ACS3000. Once the localized network is set up, the operator my change his computer IP to an IP compatible to the ACS3000 default IP. The computer IP address may be changed by selecting the control panel and then the Network and Dial-up Connection and then the properties on the LAN to reconfigure the operator’s computer IP. Since the ACS3000 default IP is 192.168.1.76 with a net mask of 255.255.0.0 and a gateway of 192.168.1.1, the operator’s computer IP must be set to 192.168.1.x where x is in the range 2 to 254, excluding 76.

If the operator wishes to use the LAN at his site, he may have to change the IP address of the ACS3000 to make it compatible with his site LAN. The only way to change the ACS3000 IP address is to set up the single system network as defined above and then telnet into the ACS3000 and execute admin as described in the next section.

LMKVS-CPU IP Setup

In order for the operator to connect to the LMKVS-CPU, the operator must know the IP address of the unit. This address will be defined at the factory but can be changed by using telnet to connect to the antenna controller and executing an administrative function. NOTE: the factory default antenna controller IP address is 192.168.1.76. Use that address if no other address has been assigned. To change the IP address, bring up an MS-DOS window then enter telnet 192.168.1.76. Login as admin with the password 'APCadmin'. The following screen will be displayed.

11 of 51

System Setup

Page 10 Page 12
Image 11
Page 10 Page 12
Contents ACS3000 Antenna Control System OMACS3000 OMACS3000 List of Figures System Description OverviewSummary Revision HistoryOMACS3000 Microprocessor Card MPU-17 Indicators Within the LMKVS-CPUMC-2 Description Motherboard Limit/Status Card LIM-2Resolver To Digital Converter Card RES-2 Low Temperature BoardDual VFD Motor Drive Card MD-3 Antenna Display Unit Optional Power/Environmental Description LMKVS-CPUPower/Environmental Description Beacon Interface System Description Operator’s Computer IP Address Operator’s Computer SetupJava Plug In Installation LMKVS-CPU IP SetupLMKVS-CPU Admin Application Regional Options SetupHome Screen System Initialized ACS3000 ScreensHome Screen System Not Initialized Home Screen System Is Initialized Home Screen Hand Held ConnectedHome Screen Hand Held Controller Connected Set Time/IPInitialization Entry Initialization ScreensInitialization Entry Screen Test Only Password Protection ScreenTest Only Password Screen Pre-Initialization Antenna SetupInitialize Site Location Pre-Initialization Antenna SetupVisible Satellites Computed Antenna Size Polarization Drive P/N RatioVisible Satellites Computed Screen Verify Jog DirectionVerify Jog Direction Screen Verify Az and El Hardware LimitsSingle Speed Pol Drive Hardware Limits Verify Pol Hardware LimitsSingle Speed Pol Hardware Limits Screen Dual Speed Pol Drive Hardware LimitsDual Speed Pol Hardware Limits Screen Select Base SatelliteSelect Base Satellite Screen Peak on Base SatelliteOMACS3000 Peak on Base Satellite Screen Automated Set Software Limits Screen Automated Set Software LimitsDirection Enter Beacon Receiver ParametersEnter Tracking Parameters Screen Review ParametersReview Parameters Screen Initialization CompletePosition/Jog Normal Operational ScreensPosition/Jog Screen Tracking ControlTracking Summary Track Control Screen Satellite Table ScreensSatellite Table Button Right Click Option Satellite Table ScreenSatellite Table Screen Working Satellite Table ScreenWorking Satellite Table Screen Satellite Entry EditSatellite Table Entry Edit Screen Logs/AlarmsLog Screen Log/Alarms Button Right Click DisplayAlarm and Events Descriptions Alarm ScreenOMACS3000 OMACS3000 OMACS3000 Alarm Screen Update TableCelestrack Web Site Norad Data Set Alternate Update Satellite Table Popup Window Update SoftwareUpdate Software Button OMACS3000

OMACS3000 specifications

Andrew OMACS3000 is a highly advanced multi-functional automation and control system designed to streamline operations in various industries, including manufacturing, utilities, and logistics. At its core, the OMACS3000 integrates cutting-edge technologies to enhance efficiency, improve precision, and facilitate real-time data monitoring.

One of the main features of the OMACS3000 is its modular architecture. This design allows users to customize the system according to specific operational needs, enabling them to scale up or down as necessary. The system can support a wide array of inputs and outputs, making it adaptable for different types of machinery and processes. The modular approach not only allows for easy upgrades but also minimizes downtime during maintenance or system changes.

Another significant characteristic of the OMACS3000 is its use of smart sensors and IoT connectivity. The system is equipped with advanced sensors that monitor various parameters such as temperature, pressure, and flow rates in real time. By leveraging IoT technology, the OMACS3000 can transmit data to a centralized management platform, allowing for in-depth analysis and streamlined decision-making. This connectivity facilitates predictive maintenance, reducing the risk of unexpected failures and optimizing maintenance schedules.

The OMACS3000 is also designed with user-friendly interfaces, featuring intuitive dashboards that provide operators with easy access to critical information. These dashboards allow users to track performance metrics, set alerts for abnormal conditions, and visualize data trends. By prioritizing user experience, the OMACS3000 empowers operators to make informed decisions quickly, thus improving overall operational efficiency.

In terms of security, the OMACS3000 incorporates robust cybersecurity measures to protect sensitive data and prevent unauthorized access. Advanced encryption protocols and user authentication mechanisms are employed to safeguard the system against potential threats, ensuring the integrity of operations.

Finally, the OMACS3000 is built to comply with international standards for safety and quality, making it suitable for global markets. Its adaptability, coupled with its comprehensive features and advanced technologies, positions the OMACS3000 as a leader in the automation and control systems landscape, paving the way for the future of efficient and reliable industrial operations.
Top Page Image Contents