Andrew ES73 manual Step

Step 5

Step 6

Hoist elevation jackscrew/panning frame assembly to mount as shown in Figures 32A/32B.

Figure 32A

Figure 32B

Apply RTV to flange surfaces and attach 221384 azimuth pivot assembly to 201327A joint assembly with 7/8 x 2-1/4 hardware from pivot assembly to joint assembly as shown in Figure 32C. Note: Use one 7/8 by 2-3/4 inch (70 mm) bolt, flat washer and nut for later attachment of grounding cable.

Figure 32C

27 Installation Procedures