Euro-Pro PC104 manual Disassembling the Valves, Trouble Shooting

Page 7

Disassembling the Valves:

9

Pressure Selector Valve: Pulling up on tab (1) allows the valve cover to snap off. Remove the valve assembly and rinse with hot, soapy water. Allow to dry and then reassemble. Do NOT disassemble the stem or bottom portion of the valve as it is factory sealed.

TROUBLE SHOOTING

Cooker Cannot be Closed

•You have tried to put the lid on with the contents already boiling.

•The seal may be too dry and needs to be oiled slightly.

The Pressure Selector Does Not Rise

•Check the time that you started heating the pot. If the pot is full and the contents are cold, it can take up to 20 minutes to come to full pressure.

•Check to see that the pressure selector is not at “0”.

If the above two points are not the cause of the problem, stop cooking immediately. Cool the pressure cooker down completely before opening and check the following:

•There may not be enough liquid in the pressure cooker. You will need at least 1 1/2 cups of liquid in order to reach full pressure. Add the

recommended amount of liquid.

Automatic Valve: Turn the lid over making sure that it is in the locked position. Place the vapor key supplied with your pressure cooker into the slots on the valve and turn counterclockwise. Remove the valve parts and rinse in hot, soapy water. Reassemble by reversing this operation.

10

1 - Vapor Key

2 - Aluminum Cap

3 - O-Ring

4 - Safety Valve Stem &

Spring Assembly

•The unit may have been overfilled and there is not sufficient room for the air to circulate and create pressure. Remove some of the ingredients that you are cooking.

•The pressure cooker is not closed properly. Repeat the closing operation. Check to see if the seal is dirty or damaged. Remove and clean the seal. Be sure to oil it after washing. Replace the seal with a new one if necessary.

•The automatic valve is dirty or blocked. Dismantle the valve, clean and reassemble it following the maintenance instructions.

•The o-ring of the valve nut is damaged and should be replaced.

•The safety valve is not working and should be replaced.

Small Amount of Steam Escaping From the Automatic Valve

Storing: After using the pressure cooker, store with lid upside- down over the pot body. Do NOT store the pressure cooker with the lid closed to avoid compressing the seal for long periods of time.

•This is not a problem because the pressure indicator is relieving any excess pressure. Water droplets may also appear.

Constant Amount of Steam Escaping From the Automatic Valve

•The heat is too high. Turn down the heat.

•The automatic valve is dirty. Follow the cleaning instructions .

•The safety valve is not working and should be replaced.

10

11

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Pressure Cooker For Household USE only Rev C Important SafeguardsCooking Time Chart Using for the First TimeOpening Your Pressure Cooker Using Your Pressure Cooker Adding Ingredients & LiquidsClosing Your Pressure Cooker Releasing Pressure & Removing the LID Releasing PressureStarting to Cook TimingNatural Steaming OFF Cleaning and StorageDisassembling the Valves Trouble ShootingChicken & Vegetable Risotto Trouble ShootingCooking Tips and Hints Adapting Favorite RecipesQuick ‘n Easy Chicken Noodle Soup Version Chicken Noodle Soup VersionPork Chops and Applesauce Great Northern Bean SoupButtery Corn-on-the-Cob Sunday RoastGravy Perfect Green BeansPumpkin Cheesecake All American Pot RoastSpiced Whipped Topping Cheesy Garlic Mashed Potatoes Honey Blueberry Rice PuddingVariation Barbeque Pork Pull-ApartTips for cooking in your new pressure cooker Linguini with Clam SauceOwnership Registration Card Canadian Consumers only Five 5 Year Limited Warranty

PC104 specifications

The Euro-Pro PC104 is a compact and robust embedded computer designed specifically for industrial applications. Its modular architecture adheres to the PC/104 standard, which makes it ideal for space-constrained environments. The PC104 form factor, measuring just 90mm x 96mm, allows for easy integration into a variety of systems, making it a popular choice among engineers and developers.

One of its standout features is its scalability. The PC104 stackable design supports multiple modules, enabling users to customize their setup based on specific needs, such as adding additional I/O ports or communication interfaces. This flexibility is essential for adapting to diverse project requirements in sectors such as robotics, aerospace, and telecommunications.

The Euro-Pro PC104 incorporates advanced processing technologies, typically featuring x86 or ARM architectures. These processors offer a balance of power efficiency and performance, making them suitable for both lightweight and demanding applications. Alongside the CPU, the board supports multiple memory configurations, allowing users to choose from various RAM sizes for optimized performance.

In terms of connectivity, the PC104 module often includes a range of built-in I/O options, such as USB, Ethernet, serial, and GPIO interfaces. This extensive connectivity is critical for integrating with other devices and networks, allowing seamless communication in industrial automation environments. Additionally, the board may support various communication protocols, including CAN, RS-232, and RS-485, enhancing its versatility.

Moreover, the Euro-Pro PC104 is designed with durability in mind. It can operate in extreme temperatures and conditions, making it suitable for outdoor and rugged applications. It typically features robust power supply options and is engineered to withstand vibrations and shocks, which are common in industrial settings.

The Euro-Pro PC104 is a preferred choice for many developers due to its compatibility with a variety of operating systems, including Windows and Linux. This broad support facilitates easier integration with existing systems and development environments, allowing for faster deployment of embedded solutions.

In conclusion, the Euro-Pro PC104 stands out as a reliable solution for embedded computing needs, characterized by its compact design, flexibility, advanced processing capabilities, extensive connectivity options, and durability in harsh environments. Its features make it an excellent choice for industries requiring specialized, resilient computing solutions.
Top Page Image Contents