Hobart H600 manual Attachments, Mixer Speeds, Bowl Scraper Attachment, Cleaning

Page 12

Attachments

To install an attachment, loosen the attachment hub thumb screw and remove the plug. Insert the attachment into the attachment hub, making certain that the square shank of the attachment is in the square driver of the mixer. Secure the attachment by tightening the thumb screw.

Move the gear shift lever to the desired speed. With the bowl support all the way up and the wire cage in the front-center position, start the mixer to operate the attachment.

The meat and food chopper attachment should be operated in second or third speed. If material in the cylinder stalls the mixer, push the STOP button at once. DO NOT attempt to restart the mixer in a lower speed — remove the adjusting ring, knife, plate, and worm and clear any obstruction. THIS ATTACHMENT MUST NOT BE USED TO CHOP BREAD CRUMBS.

NOTE: Attachment hub should not be used while mixing.

Mixer Speeds

Speed 1 (Low) — This speed is for heavy mixtures such as pizza dough, heavy batters, and potatoes.

Speed 2 (Medium-low) — This speed is for mixing cake batters, mashing potatoes, and developing bread dough.

Speed 3 (Medium-high) — This speed is for incorporating air into light batches, as well as finishing whipped items.

Speed 4 (High) — This speed is for maximum and accelerated air incorporation into light batches.

Bowl Scraper Attachment

The Mixer Bowl Scraper Attachment (when ordered) is provided with a separate instruction manual covering its installation, operation, use and care.

CLEANING

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT BEFORE BEGINNING ANY CLEANING PROCEDURE.

A flat scraper and a brush are furnished to aid in cleaning bowls and agitators.

The mixer should be thoroughly cleaned daily. DO NOT use a hose to clean the mixer — it should be washed with a clean damp cloth. The base allows ample room for cleaning under the mixer. The apron may be removed by loosening the thumb screws. Behind this apron is an access cover which may be removed for cleaning.

The Drip Cup-Splash Guard (which is secured by three screws) should be removed periodically and wiped clean.

For cleaning the Bowl Guard (including both Wire Cage Assembly and Splash Guard), refer to page 11.

– 12 –

Page 11 Page 13
Image 12
Page 11 Page 13
Contents H600 & L800 Mixers Model H600 Mixer Model L800 Mixer General Installation UnpackingLocation Check Lubrication Before UseCheck Rotation Three-Phase Machines Only Electrical ConnectionsELECTRO-MECHANICAL Timer Controls when equipped Timer is used in conjunction with the StartFor non-timed mixing Set the timer on Hold OperationProgrammable Timer Controller when equipped Using the Dial Timer to set the Mixing TimeFor Continuous Mixing 0100 0100 Changing Speeds Standard Bowl LiftMixing To rotate the Wire Cage Assembly to the rear To remove the Wire Cage Assembly for cleaningTo reinstall the Wire Cage Assembly Bowl Guard FigCleaning AttachmentsMixer Speeds Bowl Scraper AttachmentMaintenance LubricationPlanetary Planetary SealTransmission Bowl LiftAdjustments To Adjust the Bowl / Agitator ClearanceAgitator Clearance To Measure the ClearanceTroubleshooting Service

H600 specifications

The Hobart H600 is a robust and versatile commercial mixer designed for busy kitchens, particularly in bakeries, restaurants, and other foodservice operations. With its powerful performance and durability, the H600 has established itself as a trusted workhorse in the culinary industry.

One of the standout features of the Hobart H600 is its impressive 60-quart capacity, making it suitable for large batch mixing. This mixer can efficiently handle a variety of ingredients, whether you are mixing dough for bread, whipping egg whites, or combining heavy batters. Its spacious bowl allows for versatile use, accommodating everything from small to large recipes.

Powering the H600 is a potent 3 horsepower motor, which ensures consistent mixing and kneading, even when tackling dense doughs. The mixer operates with a variable speed control, enabling chefs to select the appropriate speed for various tasks. With three operational speeds, it delivers precise mixing results, ensuring that ingredients are thoroughly combined without overworking.

The Hobart H600 is designed with operator safety in mind. It features a safety interlock system that prevents the mixer from operating when the bowl is raised or the bowl guard is open. This is an essential safety feature that protects users while utilizing the equipment.

Another critical characteristic of the H600 is its heavy-duty construction. Built with stainless steel, the mixer provides exceptional durability and resistance to corrosion, which is vital for maintaining hygiene in a commercial kitchen. Its gear-driven design ensures reliable performance over time, providing a long service life.

The H600 also offers various attachment options, allowing users to easily switch out mixing tools such as dough hooks, whips, and paddles. This flexibility makes it suitable for a wide range of food preparation tasks.

In summary, the Hobart H600 is a superior commercial mixer known for its large capacity, powerful motor, variable speed controls, and robust safety features. Its durable construction and compatibility with various attachments make it a valuable investment for any professional kitchen, streamlining food preparation and enhancing culinary creativity. Whether mixing, kneading, or whipping, the Hobart H600 delivers unmatched performance and reliability for food service operators.
Top Page Image Contents