Hobart H600 manual Changing Speeds, Standard Bowl Lift, Mixing

Page 10

CHANGING SPEEDS

The GEAR SHIFT LEVER is used to change speeds. Always stop the mixer before changing speeds. To change speeds, push the STOP button, move the gear shift lever to the desired speed, and restart the mixer by pushing the START button. NOTE: If you do not stop the mixer to change speeds, it will automatically shut itself off and you will have to restart it after changing speeds.

STANDARD BOWL LIFT

The Handwheel is used to raise and lower the bowl on mixers with the standard bowl lift. Turn the Handwheel clockwise to raise the bowl or counterclockwise to lower it. Mixers equipped with Handwheel bowl lift device must be turned off to lower the bowl.

POWER BOWL LIFT (Optional)

CAUTION: Before lowering the bowl onto a bowl truck, always unlock both bowl clamps.

To raise the bowl and bowl support, move the switch lever clockwise to the RAISE position. To lower the bowl and bowl support, move the switch lever counterclockwise to the LOWER position. An overload slip clutch will ratchet at the top and bottom stop positions to signal end of travel and protect the operating mechanism.

In case of a power failure, the bowl may be raised or lowered manually. Remove the apron (secured by four thumb screws) and use a 1" open-end wrench to turn the lift screw hex in the desired direction.

MIXING

This section explains operation of the mixer and how to install bowls, agitators, and attachments. A separate Use and Applications Handbook is provided with the mixer which contains information on mixing procedures and outlines specific uses for agitators, attachments, and accessories.

Bowl

New mixer bowls and agitators (beaters, whips, and dough arms) should be thoroughly washed with hot water and a mild soap solution, rinsed with either a mild soda or vinegar solution, and thoroughly rinsed with clear water BEFORE being used. This cleaning procedure should also be followed for bowls and agitators before whipping egg whites or whole eggs.

The bowl must be installed before the agitator.

To install the bowl, fully lower the bowl support. Position the bowl so the alignment bracket on the back of the bowl is under the retainer on the bowl support and the alignment pins on the front of the bowl support fit in the holes in the bowl. Lock the bowl in place by rotating the bowl clamps over the ears of the bowl.

If a bowl adapter is required, install it on the bowl support as you would the bowl and then install the bowl on the adapter.

Agitator

To install an agitator, the bowl must be installed and fully lowered. Place the agitator in the bowl, push it up on the agitator shaft, and turn it clockwise to seat the shaft pin in the slot of the agitator shank.

To Raise the Bowl While Mixing

To raise the bowl while the agitator is mixing the product (when required by recipe or when using the Bowl Scraper Attachment): Load ingredients. Close Wire Cage Assembly. Select Low speed. To begin mixing, press and hold the Start button; then raise the bowl.

– 10 –

Page 9 Page 11
Image 10
Page 9 Page 11
Contents H600 & L800 Mixers Model H600 Mixer Model L800 Mixer General Location InstallationUnpacking Check Lubrication Before UseCheck Rotation Three-Phase Machines Only Electrical ConnectionsFor non-timed mixing Set the timer on Hold ELECTRO-MECHANICAL Timer Controls when equippedTimer is used in conjunction with the Start OperationUsing the Dial Timer to set the Mixing Time Programmable Timer Controller when equippedFor Continuous Mixing 0100 0100 Standard Bowl Lift Changing SpeedsMixing To reinstall the Wire Cage Assembly To rotate the Wire Cage Assembly to the rearTo remove the Wire Cage Assembly for cleaning Bowl Guard FigMixer Speeds CleaningAttachments Bowl Scraper AttachmentPlanetary MaintenanceLubrication Planetary SealTransmission Bowl LiftAgitator Clearance AdjustmentsTo Adjust the Bowl / Agitator Clearance To Measure the ClearanceTroubleshooting Service

H600 specifications

The Hobart H600 is a robust and versatile commercial mixer designed for busy kitchens, particularly in bakeries, restaurants, and other foodservice operations. With its powerful performance and durability, the H600 has established itself as a trusted workhorse in the culinary industry.

One of the standout features of the Hobart H600 is its impressive 60-quart capacity, making it suitable for large batch mixing. This mixer can efficiently handle a variety of ingredients, whether you are mixing dough for bread, whipping egg whites, or combining heavy batters. Its spacious bowl allows for versatile use, accommodating everything from small to large recipes.

Powering the H600 is a potent 3 horsepower motor, which ensures consistent mixing and kneading, even when tackling dense doughs. The mixer operates with a variable speed control, enabling chefs to select the appropriate speed for various tasks. With three operational speeds, it delivers precise mixing results, ensuring that ingredients are thoroughly combined without overworking.

The Hobart H600 is designed with operator safety in mind. It features a safety interlock system that prevents the mixer from operating when the bowl is raised or the bowl guard is open. This is an essential safety feature that protects users while utilizing the equipment.

Another critical characteristic of the H600 is its heavy-duty construction. Built with stainless steel, the mixer provides exceptional durability and resistance to corrosion, which is vital for maintaining hygiene in a commercial kitchen. Its gear-driven design ensures reliable performance over time, providing a long service life.

The H600 also offers various attachment options, allowing users to easily switch out mixing tools such as dough hooks, whips, and paddles. This flexibility makes it suitable for a wide range of food preparation tasks.

In summary, the Hobart H600 is a superior commercial mixer known for its large capacity, powerful motor, variable speed controls, and robust safety features. Its durable construction and compatibility with various attachments make it a valuable investment for any professional kitchen, streamlining food preparation and enhancing culinary creativity. Whether mixing, kneading, or whipping, the Hobart H600 delivers unmatched performance and reliability for food service operators.
Top Page Image Contents