Hobart H600 manual 0100

Page 8

PROGRAMMABLE TIMER CONTROLLER (when equipped) continued

Using the Preset Keys, P1 or P2, to set the Mixing Time . . .

Each preset key has four time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or P2 indicator light identify which preset time is being displayed. The chart below shows the default settings; the next page shows how to revise these preset times. The Dial Timer KNOB can be used to adjust the mixing time if the knob is turned prior to pressing START.

-

P1

-01:00

-- - -

P2

1 2 3 4

 

Indicators above P1 and 1 indicate the first preset time contained in P1.

Beginning from the Idle display [ – – : – – ], press P1 or P2 to display the #1 preset mixing time. ( Pressing P1 or P2 again will display the next preset time, etc.)

☛The Dial Timer KNOB can adjust the time. START and STOP buttons control mixing operation.

Press START to begin mixing: The timer will countdown from the set time to [00 : 00].

If STOP is pressed, both mixing and timer countdown will be interrupted. After pressing STOP . . . Press START to resume both mixing and timer countdown; or, press CLEAR to return to the Idle display.

When the mixer is stopped, you may perform any appropriate task, such as the following: Add ingredients, change speed, reset the timer, continue mixing, or unload.

When the timer reaches [ 00 : 00 ] the mixer stops; a beep tone sounds for two seconds; and the next preset mixing time displays. When the last preset time reaches [ 00 : 00 ], the P1 or P2 indicator goes off; and the Idle display [ – – : – – ] returns. Repeat from ☛ to complete four preset times.

The timer reverts to the Factory Programmed Preset Times after any power interruption:

Factory Programmed Preset Times

Preset Key

 

 

Indicator

 

 

1

2

3

4

 

 

 

 

 

P1

01:00

02:00

10:00

00:00

P2

02:00

01:00

05:00

03:00

 

 

 

 

 

– 8 –

Page 7 Page 9
Image 8
Page 7 Page 9
Contents H600 & L800 Mixers Model H600 Mixer Model L800 Mixer General Installation UnpackingLocation Check Lubrication Before UseCheck Rotation Three-Phase Machines Only Electrical ConnectionsELECTRO-MECHANICAL Timer Controls when equipped Timer is used in conjunction with the StartFor non-timed mixing Set the timer on Hold OperationFor Continuous Mixing Programmable Timer Controller when equippedUsing the Dial Timer to set the Mixing Time 0100 0100 Mixing Changing SpeedsStandard Bowl Lift To rotate the Wire Cage Assembly to the rear To remove the Wire Cage Assembly for cleaningTo reinstall the Wire Cage Assembly Bowl Guard FigCleaning AttachmentsMixer Speeds Bowl Scraper AttachmentMaintenance LubricationPlanetary Planetary SealTransmission Bowl LiftAdjustments To Adjust the Bowl / Agitator ClearanceAgitator Clearance To Measure the ClearanceTroubleshooting Service

H600 specifications

The Hobart H600 is a robust and versatile commercial mixer designed for busy kitchens, particularly in bakeries, restaurants, and other foodservice operations. With its powerful performance and durability, the H600 has established itself as a trusted workhorse in the culinary industry.

One of the standout features of the Hobart H600 is its impressive 60-quart capacity, making it suitable for large batch mixing. This mixer can efficiently handle a variety of ingredients, whether you are mixing dough for bread, whipping egg whites, or combining heavy batters. Its spacious bowl allows for versatile use, accommodating everything from small to large recipes.

Powering the H600 is a potent 3 horsepower motor, which ensures consistent mixing and kneading, even when tackling dense doughs. The mixer operates with a variable speed control, enabling chefs to select the appropriate speed for various tasks. With three operational speeds, it delivers precise mixing results, ensuring that ingredients are thoroughly combined without overworking.

The Hobart H600 is designed with operator safety in mind. It features a safety interlock system that prevents the mixer from operating when the bowl is raised or the bowl guard is open. This is an essential safety feature that protects users while utilizing the equipment.

Another critical characteristic of the H600 is its heavy-duty construction. Built with stainless steel, the mixer provides exceptional durability and resistance to corrosion, which is vital for maintaining hygiene in a commercial kitchen. Its gear-driven design ensures reliable performance over time, providing a long service life.

The H600 also offers various attachment options, allowing users to easily switch out mixing tools such as dough hooks, whips, and paddles. This flexibility makes it suitable for a wide range of food preparation tasks.

In summary, the Hobart H600 is a superior commercial mixer known for its large capacity, powerful motor, variable speed controls, and robust safety features. Its durable construction and compatibility with various attachments make it a valuable investment for any professional kitchen, streamlining food preparation and enhancing culinary creativity. Whether mixing, kneading, or whipping, the Hobart H600 delivers unmatched performance and reliability for food service operators.
Top Page Image Contents