System Applications

ISM4 INSTALLATION & PROGRAMMING MANUAL

The ISM4 is a versatile device with endless possible applications. For the purpose of this manual, two basic applications will be described. One is a typical Home Theater application with the ISM4 managing system sync for an A/V Receiver and three source components. The other is a multi-zone application integrating the ISM4 with a multi-zone controller that does not provide intelligent source power management to keep the sources in sync with whole-house system status.

HOME THEATER SYSTEM (Figure 4)

In this configuration, all system components can either be controlled directly with a programmed system remote or exclusively through an IR Receiver connected to the ISM4. In this configuration the A/V Receiver will be turned ON/OFF with the remote (or receiver front panel power button). When the receiver turns ON, the switched AC Outlet on the rear panel will also turn ON, energizing the connected 12V Power Supply. The SMVLT01 Voltage Sensor will detect the change of state, (in this case from OFF to ON) and show a control voltage to the Source 1 “Sense In” on the ISM4. (ISM4 System Status is always referenced to the device sensed by the Source 1 “Sense In”). The first task that the ISM4 will take in response to the Off-to-On transition is to execute the Power ON Macro associated with the Source 1 “Sense In” input. Recall that in executing this macro (launched by a Source 1 “Sense In” trigger) the IR content of the first Command Structure will be bypassed. Refer to the Sense In section for further information. The ISM4 will then ‘look’ at the other Source Sense Inputs and if they are OFF (no sensor control voltage), the ISM4 will output the Power ON Macros associated with each source to turn them ON. THE SYSTEM POWER ON COMMAND IN THE REMOTE SHOULD ONLY CONTROL THE A/V RECEIVER. The ISM4 will control the other devices for turn ON and sync. Additionally, each Source Power ON Macro can be programmed for up to five IR commands (and associated delays). If the sources are to be set to particular settings at turn on, these commands will be issued by the ISM4, and NOT the system remote. If at any time that the System Reference Device (A/V Receiver) is ON, any of the other sources turn off, for any reason, the ISM4 will sense the variation from system sync (source OFF vs system ON), and the ISM4 will automatically issue the Power ON Macro for the device that is out of sync.

IR commands from the remote can be passed through the ISM4 via the IR Receiver to the emitters, allowing the system components to be hidden in a cabinet or closet, as long as the IR Receiver is positioned in ‘line-of-sight’ to the system remote. The system components can also be controlled directly from the remote, but no power commands should be issued from the remote other than for the A/V Receiver.

Turning the system OFF is the opposite process. When the A/V Receiver is turned OFF with the system remote (or receiver front panel button), the switched AC outlet on the rear panel will turn OFF, de-energizing the 12V power supply. The SMVLT01 Voltage Sensor will detect the change of state, (ON to OFF), and cut the control voltage to the Source 1 “Sense In”. The first task that the ISM4 will take in response to the On-to-Off transition is to execute the Power Off Macro associated with the Source 1 “Sense In” input. Recall that in executing this macro (launched by a Source 1 “Sense In” trigger) the IR content of the first Command Structure will be bypassed. Refer to the Sense In section for further information. The ISM4 will then ‘look’ at the other Source Sense Inputs and if they are ON, (sensor control voltage) the ISM4 will output the Power OFF Macros associated with each source to turn them OFF. THE SYSTEM POWER OFF COMMAND IN THE REMOTE SHOULD ONLY CONTROL THE A/V RECEIVER. The ISM4 will control the other devices.

Other Applications

Using the same basic scheme described above, there are many options as to what device will be the System Reference Device. In some cases it will be most intuitive to have a TV, Video Monitor or projector be the System Reference Device. (See Figure 5 in this manual and the ISM4 Quick Start Guide for configuration and programming instructions) Any time the TV is turned ON, by incorporating a SMVID01 Video Sensor on a TV Video Output, the ISM4 will execute ON Macros to turn ON an A/V Receiver, DVD Player, Cable Box and Satellite Receiver, for example. Another possibility would be to have a Video Game trigger the system. By making the Video Game the System Reference Device, any time the Video Game is turned ON, the ISM4 will activate and sync all appropriate devices for extreme gaming. The possibilities are endless. When incorporating an ISM4 into a system, ask the question: “What device or appliance do I want to use to trigger other devices or appliances?”

ISM4 specifications

The Xantech ISM4 is an innovative multi-zone audio distribution system designed to enhance the listening experience across various environments. This advanced model is particularly suitable for residential and commercial applications, where high-quality audio distribution is crucial.

One of the standout features of the ISM4 is its ability to manage up to four separate audio zones. This means users can enjoy different audio sources in different areas simultaneously, catering to diverse preferences and activities. The system supports various audio sources, including streaming services, local media players, and traditional radio, which can all be directed to any zone, providing flexibility and convenience.

The ISM4 utilizes sophisticated digital signal processing (DSP) technology to ensure that audio quality is always at its peak. The DSP allows for customizable audio settings such as equalization, volume adjustment, and audio balance, enabling users to tailor their listening experience to their unique preferences and room characteristics. This level of customization ensures that whether it’s background music in a living room or dynamic sound in a home theater, the audio output is optimized.

Another significant characteristic of the Xantech ISM4 is its user-friendly interface. The system can be controlled via a dedicated app or physical switches, offering versatility in how users interact with their audio setup. The app is compatible with both iOS and Android devices, making it accessible to a wide range of users. Furthermore, the ISM4 can be easily integrated with third-party control systems and home automation solutions, allowing for seamless synchronization with other smart home technology.

Connectivity is another strong point of the ISM4. It supports various input options, including HDMI, optical, and analog connections, allowing users to connect a variety of audio sources without hassle.

Reliability and durability are ensured through robust build quality, making the ISM4 suitable for long-term use in various environments. With its combination of advanced audio distribution capabilities, user-friendly features, and robust connectivity, the Xantech ISM4 stands out as a leading choice for those looking to elevate their audio experience in both home and commercial settings. Users can expect exceptional sound quality, seamless integration, and the flexibility to enjoy audio the way they want.